TECHSMARTER TSB7300 Wireless Power Bank Instruction Manual
- June 5, 2024
- TECHSMARTER
Table of Contents
wireless power bank
Model No.: TSB7300
USER INSTRUCTION
1 4 LED Power Indicator Lights
2 Micro USB input
3 Type-C Input/Output
4 USB output
5 Wireless output
6 Power ON/OFF
7 Suction Cups
8 Kick Stand
PRODUCT SPECIFICATION
Structure|
Model Number
Battery Capacity
Input
Output
Product Dimension
Weight
| TSB7300
10000mAh
Micro USB Input: 5V/2A, 9V/2A
USB-C Input: 5V/2A, 9V/2A
USB Output 1&2: 5V/3A, 5V/4.5A, 9V/2A,12V/1.5A (22.5W)
USB-C Output: 5V/3A, 9V/2.3A, 12V/1.67A (20W)
Wireless Output: 15W
156×71.5×17.2mm
261g
Use micro cable or Type-C cable to charge power bank
Computer usb port
Charge the Android phone and iPhone
Charge mobile phone with wireless output
Minimum instruction for Use for Portable Power Banks
to be provided with portable power banks to the customer
- The power bank will generate heat when charging. Always charge in a well ventilated area. Do not charge under pillows, blankets or on flammable surfaces.
- Keep the power bank away from heat sources, direct sunlight, combustible gas, humidity, water or other liquids.
- Do not disassemble, open, microwave, incinerate, paint or insert foreign objects into the power bank.
- Do not subject the power bank to mechanical shock such as crushing, bending, puncturing or shredding. Avoid dropping of placing heavy object on the power bank.
- Do not short-circuit the power bank or store it in a receptable where it may be short-circuited by other metallic or conductive objects.
- Do not operate the power bank if it has been wet or otherwise damaged, to prevent against electric shock, explosion and/or injury. Contact the dealer of authorized agent.
- Power bank usage by children should be supervised.
- Please read the operating instructions (including charging instructions and information on the minimum and maximum operating temperatures), supplied with this power bank.
Dispose Advice for Waste Power Bank
Battery cell in this power bank may cause certain damage to the environment.
In order to protect our environment, please dispose of waste power bank
properly.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>