TECHSMARTER TSB7600 Wireless Power Bank User Guide
- June 10, 2024
- TECHSMARTER
Table of Contents
TECHSMARTER TSB7600 Wireless Power Bank User Guide
Product Overview
- Transmitter Coil Area
- Wireless Charging Status Indicator
- Switch
- Power Level Indicator
- Micro Input
- Type-C Input /Output
- USB Output
Specifications
- Capacity: 12000 mAh
- Cell: Li-Polymer, Grade A
- Transmission Distance: 6mm
- Charging Efficiency: .70%
- Size: 1507719mm
- Weight: 288g
- Input Voltage: Micro: 5V/2A ,9V/2A ; Type C: 5V/2.5A,9V/2A
- Output Voltage: 5V/3.1A, 9V/2A,12V/1.5A
- Wireless Output Voltage: 5V/1A; 9V/1.12A
- Wireless Power: 10W/7.5W/5W
How To Use
Charging your Wireless Power Bank
- Insert USB cable USB A end into power adapter.
- Plug power device into DC power socket.
- Plug the end of the Micro USB data cable into the Input port of the product.
The blue light flashes to indicate the current power level.
Remark: please use the adapter & data cable could support AFC or PD at least if max output required
Battery Indicator
Charging Your Device
USB port Schematic for regular charging and discharging
- Insert the USB data cable USB A end into Output.
- Plug the other end of the cable into a device such as a mobile phone.
- Click the switch button and the power is discharged to charge the device such as a mobile phone and the blue light flashes.
The red light is on, indicating wireless charging standby.
Wireless Discharging
-
Make sure there isn’t any foreign object attached to the back of the phone, such as a ring holder of metal plate.
A case is not a foreign object. -
Click the switch and the red light is on, indicating wireless charging standby to charge the device such as a mobile phone.
-
Place a mobile phone or other compatible device that complies with the Qi protocol on the mobile power supply to achieve wireless charging. Note that the center of the mobile phone’s receiving coil must coincide with the transmitting coil of the product, and the green light indicates wireless charging.
Accessories
- Wireless Power Bank*1
- Micro USB Charging Cable*1
- USB C Cable*1
- User Manual*1
Indicator
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CUSTOMER SUPPORT
One Year waranty
Customer Support:
[email protected]
www.techsmarterusa.com
