DreamWave RockStar Mini Super Portable Bluetooth Speaker User Guide
- June 6, 2024
- DreamWave
Table of Contents
DreamWave RockStar Mini Super Portable Bluetooth Speaker
What’s in the box
Product Introduction
-
Mode Indicator Bluetooth Mode: Flash Blue fast, speaker is searching for pairing; Solid Blue, Bluetooth connection is completed between speaker and device.
USB Mode : Flash Blue slow Aux I N Mode : Flash Red slow
-
TWS Indicator
Flash White fast, speaker is searching for TWS connection;
Solid White, TWS connection is completed between speakers. -
Low Battery Indicator
Low battery status: Flash Red * Normal status: No light on
-
ECHO Volume Knob
Turn ECHO volume knob to adjust the microphone Echo volume, turn the volume up+ by clockwise rotation, and turn the volume down- by anti-clockwise rotation.
-
MIC Volume Knob
Turn MIC volume knob to adjust microphone volume, turn the volume up+ by clockwise rotation, and turn the volume down- by anti-clockwise rotation. -
Power ON/OFF & Volume Knob
Power ON/OFF: Long press button to Power ON/OFF
Volume Adjustment: Turn the volume up+ by clockwise rotation, and turn the volume down- by anti-clockwise rotation.
Input
AUX IN
Battery Charging
USB Connect
Bluetooth
After connection, battery status of the RockStar MINI can be shown on iPhones’ Notification Panel with iOS 5.0 and above.
Hands-free
TWS Function Operation
For the ULTIMATE listening experience, you can pair or connect TWO RockStar MINI speakers together by using DUAL PAIRING MODE with the following steps:
-
=Master RockStar MINI
-
=Slave RockStar MINI
-
Make sure you turn off all music apps on your mobile device before entering DUAL PAIRING mode.
-
The RockStar MINI is capable of connecting with two separate mobile devices at one time. However, to enter DUAL PAIRING mode, please make sure the first “Master” RockStar MINI you are pairing with is connected to ONLY ONE mobile device.
-
The second “Slave” RockStar MINI must not be connected with any mobile devices before entering DUAL PAIRING mode.
-
ln DUAL PAIRING mode, pressing the power button on either of the two RockStar MINIs, will turn off both RockStar MINIs together.
-
Successfully DUAL PAIRED RockStar MINIs will remain paired even after you power them off and will automatically stay connected the next time you power them on for use.
Technical Information
TroubleShooting
- Applicable To: All DreamWave Bluetooth speakers.
- The troubleshooting steps in this article apply if audio is intermittent, crackling or distorted when streaming via Bluetooth.
-
Try playing other audio files. Ensure that audio can play fine from the same audio device when using a headphone.
-
If Step 1 is not the case, try listening to audio by connecting the speaker to the Bluetooth device using the Aux-in cable. This will isolate if it’s a Bluetooth connection issue or not. Remember to disconnect/un-pair the Bluetooth connection first.
-
If the issue only happens when connecting via Bluetooth, do the following:
-
Check that you are connected to the correct speaker ( i.e. select
“RockStar MINI”within the Bluetooth list on your device). -
Check that the volume is not set to minimum.
-
Ensure that the distance between the speaker and the Bluetooth device is with the distance of 10 meters.
-
Turn the speaker off and turn it on again to reset the speaker.
-
Clear the current pairing selection of your Bluetooth device.
-
To further isolate the problem, do please shut down all other surrounding Bluetooth devices.
-
Try to re-pair the speaker with the Bluetooth device.
If the problem still persist when connecting either to Bluetooth or Aux-in, please contact Dreamwave Customer Support via email.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>