Kingtron TECHNOLOGY W371 3 In 1 Magnetic Wireless Charger User Manual
- June 15, 2024
- Kingtron TECHNOLOGY
Table of Contents
Kingtron TECHNOLOGY W371 3 In 1 Magnetic Wireless Charger
Packing list
Product Description
Specification
- Model: W371
- Output: Phone: 15W/10W/7.5W/5W
- Watch: 2.5W
- Input: 5V/3A 9V/2A
- For AirPods: 5W
Compatibility
-
martphone
- Work For iPhone: iPhone 15, iPhone 15 Plus, IPhone 15 Pro, iPhone 15 Pro Max,
- iPhone 14, iPhone14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13,
- iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13mini, iPhone 12, iPhone 12 Pro,
- iPhone 12 Pro Max, iPhone 12 mini
-
For Apple headphones
Work For Apple Headphones: AirPods 2, AirPods 3, AirPods Pro, AirPods Pro2 -
Smartwatch
Work For Apple Watch: Hermes/Nike/Ultra 2/Ultra/9/8/7/6/54/3/2/SE
How to use the product
-
Charging the cell phone: Connect the power adapter to the USB-C power input port of the wireless charger, when the power is turned on, the blue light of the charging indicator will light up for 3 seconds and then turn off. 1Open the cell phone holder upwards 2 Place the cell phone in the cell phone charging position, the blue light of the indicator will be on for 5 seconds and then go out, indicating that the cell phone is charging normally. If the phone is not charging properly, the blue light flashes rapidly.
-
Headset charging:Place the bluetooth headset in the headset charging position. The blue light of the indicator light is on for 5 seconds and then off, indicating that the headset is charging normally. If the headset is not charging properly, the blue light flashes rapidly.
Note: Please do not wear 01lin (3mm) silicone shielding, otherwise it may lead to poor contact and can not be charged) -
Watch charging 1Open the watch module upwards 2Place the watch in the wireless charging position and align it with the magnet. The charging indicator will light up for 5 seconds and then turn off, indicating that the watch is charging.
Warm Tips
Please pay attention to the following items, otherwise it may cause failures like irregular charging, over-heated charging, intermittent charging, or even no charging.
- Please place your phone/watch/headset in the correct charging area.
- The charging distance is between 0.07in-0.21in(3-8mm), please do not wear protection cases thicker than 0.11in(3mm).
- During the charging process, please make sure there are no metal or magnetic objects around the central 2.36in of the back of the phone.
- The lower the temperature, the faster the charging speed, and the charging speed is faster in winter than in summer.
- Please do not charge in a high temperature and humid environment, s as to not to damage the circuit.
- Please make sure that your phone support magnetic charging, or wear a magnetic phone case;
- If charge a wireless charging mobile phone without magnetic function,
please lay the charging station flat, but it is not recommended. Because it may cause lower charging speed, or cause heat.
FCC
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 7.87in(20cm) between the radiator & your body. This device complies with part 15 of the FCC rules operations subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received including. interference that may cause undesired operation.
FCC Warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate th equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in are sidential installation. This equipment generates uses and
can radiate radio frequency energy and if not installed and used in accordance
with the instructions may cause harmfu interference to radio communications.
However there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and
on. The user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.