AutomatikCentret ETR2 Power Module Instructions

AutomatikCentret ETR2 Power Module

INSTALLATION INSTRUCTION

• Push power module into wallbox with mains wiring to the rear.

• The power supply can be installed in a different location from the evotouch unit. Observe correct polarit Red (+), Black (-). X Y not used.
  Cable length:

  • max. 5m 0.5 mm2
  • max 10m 10 mm2

• Attach wallplate to wall box or surface (power module remote).

ABOUT COMPANY

• Strandvejen 42
• Saksild
• 8300 Odder
• 86 62 63 64
• www.automatikcentret.dk
• info@automatikcentret.dk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>