HIKVISION DS-PDMCX-E-WB Wireless External Magnet Detector User Guide
- June 6, 2024
- Hikvision
Table of Contents
HIKVISION DS-PDMCX-E-WB Wireless External Magnet Detector
APPEARANCE
- Magnetic Stick 2.
- Sensor
- Battery
- Power Switch
- Tamper Button
- Indicator
- External Input
- Rear Tamper Sheet 9. Positioning Mark
ENROLLMENT
TEST
| Supports | Non-metallic Surface |
|---|---|
| Direction | Break(Remove) |
| Y | 51 |
| X+ | 20 |
| X- | 23 |
| Z | 76 |
Check if the installation position is properly. Magnet Detection Performance Table
INSTALLATION
- Check signal strength.
- Install the detector. Screw for real panel tamper-proof
- (Optional)route the input cable through cable hole if external inputs are required.
Scan the QR code for more information and operation help.
Specification
| Detection Gap | According to the magnet detection performance table |
|---|---|
| Tamper Protection | Front,Rear |
| Alarm Input | 2 |
| LED Indicator | Blue(Alarm) |
| Transmission Frequency | 433MHz |
| Transmission Range | 1000m (open area) |
| Battery Type | CR123A × 1 |
| Standard Battery Life | 5 years |
| Operation Temperature | -20 °C to 60 °C(-4 °F to 140 °F) |
| Storage Temperature | -30 °C to 65 °C (-22 °F to 149 °F) |
| Operation Humidity | 10% to 90% |
| Dimension(WxHxD) | Sensor: 40.5 mm × 146 mm × 40.9 mm |
Magnetic Stick: 30.5mm × 146mm × 40.9 mm
Weight| 247 g
Application Scenario| Outdoor, IP66
FCC NOTES
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual The Manual includes instructions for using and managing the
Product. Pictures, charts, images and all other information hereinafter are
for description and explanation only. The information contained in the Manual
is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision
website
(https://www.hikvision.com/). Please use this Manual with the guidance and
assistance of professionals trained in supporting the Product. and other
Hikvision trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned are the properties of
their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF
INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE
ANY RESPONSIBILITY FOR ABNORMAL OPERATIONS, PRIVACY LEAKAGE OR OTHER DAMAGES
RESULTING FROM CYBER-ATTACK, HACKER ATTACKS, VIRUS INSPECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING
THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT
USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR
PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY
NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info
BATTERY CAUTION
- replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
- disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
- a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas
- Chemical burning danger Do not swallow the battery.
- Keep new and used batteries away from the children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- Risk of explosion if battery is replaced by an incorrect type.
- Replacement of a battery with an incorrect type can defeat a safeguard.
- Dispose of used batteries according to the instructions and local regulations.
- If the battery compartment does not close securetyly, stop using the product and keep it away from children.
- + identifies the positive terminal(s) of equipment that is used with, or generates direct current. – identifies the negative terminal(s) of equipment which is used with, or generates direct current.
INSTALLATION CAUTION
The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>