XUNHON TRI-01 Lightweight Tripod User Manual
- June 6, 2024
- XUNHON
Table of Contents
XUNHON TRI-01 Lightweight Tripod
Product Structure
Specifications
| Maximum Height | 55”(1.40m) |
|---|---|
| Minimum Height | 16”(0.41m) |
| Folded Length | 16.7”(0.425m) |
| Tube Diameter | 0.69”(17.5mm) |
| Weight | 1.27lbs(0.58kg) |
| Load Capacity | 6.6lbs(3kg) |
HOW TO USE
- Unlock the Flip leg locks one by one, extend all the legs to the height you need and then lock them all Place it on the ground and adjust it to be balanced to avoid tripod tilt.
- Unlock the Center column locking knob to increase the height. You can adjust from 16-55 inches (0.41m-1.40 m) by shortening/extending the length of the legs or center column
- Lock all knobs tightly-please confirm that the brace system is fully expanded before installing your camera to avoid its falling
- The Level can be confirmed by reviewing the built-in bubble
- One-click to Remove the Quick-Release Plate, install your camera, phone, laser measure, laser level, or other product on the plate-and then install the product with a plate on the tripod
Note : Failure to properly secure the Flip leg locks may cause the tripod legs to retract unexpectedly and may damage the tripod or the camera mounted on it.
Important Safety NOTES
- Before installing the camera or other products on it, please confirm that the tripod has been placed stable. Lock ALL knobs well to avoid the tripod’s tilting and falling down.
- Do not carry or transport the tripod with camera/other expensive goods attached to it(for example, you should not carry it on your shoulders or in your arms to move)-to avoid the valuables’ falling from the tripod
- Do not store or expose your tripod in an overheating or supercooling environment, or use it near any flame or fire.
- Do not OIL or GREASE any part of the tripod.
- Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents.
- Do not exceed the load limit of this product.
Note: One leg of the tripod facing forward and the person standing between the two legs of the tripod – this is a more stable angle to prevent you from knocking it down and causing it to fall.
Application
As a tripod suitable for both Indoors&Outdoors, it doesn’t take up a lot of
space to shoot or perform video at home. It’s lightweight enough for taking
out for traveling & camping. Its weight of 580g is equivalent to two
smartphones.
Compatible with most video cameras, digital cameras, still cameras, GoPro
devices, smartphone adapters (included), and scopes. Suitable for all products
that can be installed on a 1/4” screw and weigh less than 6.6 lbs – such as
camera, laser measure, self- timer lamp, laser level, and so on.
Special Designed Parts
-
Removable Quick-Release Plate
The tripod’s quick-release mounting plate makes it easy to remove your camera from the tripod, helping to ensure fast transitions between shots & for quickly moving. -
Horizontal bubble
Small horizontal bubble designed for helping you keep the tripod horizontal, avoid tripod’s tilting. -
Square tube
Better compression resistance-three dimensional square foot tube, having more compression resistance & better load-bearing capacity, compared with the round tube. -
2 in 1 Mobile Phone Holder
This 2 in 1 mobile phone adapter can be used for both iPad & mobile phones. We have specially designed this multifunctional mobile phone holder so that you can use your mobile devices of different sizes. If the mobile phone adapter in the box is lost due to logistics, please contact us at any time to reissue it for you at any time.
24-Month After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning the maintenance and repair of your product as well as spare parts. Please tell us in time whenever you need our help, we will always reply within 24 h.
Wireless Bluetooth Remote Shutter
Steps:
- Remove the back cover of Bluetooth, put in the battery (make the positive pole sife up) and install the battery.
- Press the photo button for 5 seconds until the blue light flashes.
- The blue light flashes to indicate that it can match the Bluetooth of your mobile phone.
- Turn on the Bluetooth of your mobile phone and match BT1818 Bluetooth. After the mobile phone is connected to BT1818 Bluetooth, you can control the mobile phone to take pictures from a long distance by briefly pressing the photo button once.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>