tecbot TV Series Robot Vacuum Cleaner User Manual

tecbot TV Series Robot Vacuum Cleaner

Important Safety Instructions

• Before using this product, please read the following safety instructions and follow all normal safety precautions This device can not be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge e if they have been given supervised ion or instruct on concerning the use of this device in a safe way and understand the hazards involved.
• Children should be supervised to ensure they do not play with this device.
• Cleaning and maintenance shall not be performed by children without adult supervise ion.
• This device is only to be used with the power supply unit provided.
• For the purposes of recharging the battery, only use the detachable power supply unit provided with this device.
• The battery must be removed from this device before this device is disp os ed off. To remove the battery from this device, first, remove the screens on the bottom, then remove the main PCB and unscrew the battery cover using a screwdriver. Remove the battery by disconnecting the quick connector
• The used battery should be placed in a sealed plastic bag and disposed of safely according to local Denver one ntal regulations.
• The eternal flexible cable or cord of the power supply unit can not be replaced: if the cord is damaged, the power supply unit shall be disposed.
• This device is for in-door uses only.
• This device is not a toy. Do not sit or stand on this device. Small oil dren and pets should be supervised when this device is operating.
• Store and operate this device in room temperature environments only
• Clean with a cloth dampened with water only.
• Do not use this device to pick up anything that is burning or smoking.
• Do not use this device to pick up spills of bleach, paint, chemicals, or anything wet.
• Before using this device, pick up objects like clothing and lo os e-paper. Lift up cords for blinds or curtains, and move pawer cords and fragile objects out of the way. If this device passes over a power oord and drags it, an object could be pulled off a table or shelf.
• If the room to be cleaned has a Baloo NY, a physical barrier should be used to prove no access to the balcony and to ensure safe operation.
• Be aware that this device moves around on its own. Take care vuh en waking in the area where this device is operating to avoid stepping on it.
• Do not operate this device in areas with exposed electrical outlets on the floor.

Warning

• Only certified Sohnicd and may ds assemble the product Users are not allowed to disassemble or repair the pr odd.
• Only use the AC adapter provided by the factory. Using other AC adapters may cause electric shock, fire, or product damage.
• Do not touch the power cord, plug, or adapter when your hands are wet.
• Keep loose clothing and fingers away from being drawn into the pro duct’s wheel.
• Keep the robot vacuum away from all flammables
• Never clean the robot while it is on the charging dock or plugged indirect
• Unplug the robot and turn off the power switch when cleaning.
• Keep the AC power cord tucked away from becoming damaged in any way
• This product is to be used only indoors. Not intent de d for outdoor use.
• Do not sit on top of the product or attach an object on top of it.
• Do not use this product in wet or moist environments.
•  Before use, remove all the objects that could get caught in the brushes or suction passage.
• Do not place this product on furniture or platforms where it can fall and be damaged.
• Turn the power switch off when not in use for a long period of time or when transporting the unit
• To avoid battery damage please check whether the adapter and outlet are properly connected.
  To avoid any tripping hazards or injuries please inform all the people in the house when this product is in use.

Packing list

About the Robot

Product Using / Note

if the robot comes close to the edge of the stairs, or the small space among the furniture, please place the fence in order to run smoothly.

Please do not use the mop on the carpet, if there are carpet tassels, draw them to the bottom of the carpet.

Product Using/ Charging

• Charging Place the charging dod against the wall, make sure there are 2 meters of free space in front of the dock.
• Meter free space on the right and left
• Connect the charging dock to the adapter.
• Mount the side brush: press the side brush to the slot, and you will hear a did sound, which means the installation s completed.
• Turn on the power button: switch it on from the bottom of the robot 1 is “on”, O s “off)
• Charging: put the robot on the charging dock station, and make sure the charging contact points are donned well when you hear “beep” t means start ch arg ing.
• During the cleaning process, when the robot b artery gets low, it will return to the charging dock station automatically.

You can just press the on the robot or remote control, it will return to the charging dock station.

App Download and Network control

• In order to make good use of the robot, we suggest that you use the APP to cotrol the robot
• Before starting, please confirm:
• Your smartphone or tablet connected to the Wi-Fi
• I0S 80 or later
• Android 44 or later
• Support 246 WFi
• 10 Fi indicator blinks quickly.
• The robot is charging on the charging dock or the battery is at a high level.
• Search “Tecbot “on 10s App Store or Google Play Store.

If the connection failed, check the following

• to make sure the router is networking.
• make sure the Wi Fipassuord corre.
• only support 2.40 W Fi

Add the robot to the APP and connect to Wi-Fi

• Download the “Tech of” APP from the 10S APP store or Android Google Play.
  Go to the “Tecbof’APP and create your account
  Hit the “Robot” icon on the left-bottom corner to add the robot, and scan the QR code on the side of the robot. W- Fittings: Apress and hold the button for 35seconds, you will hear a ” beep”. that means the robot is on connection mode, the8 button blinks quickly, and follows the APP instructions.

• If the above setting failed, select the compatible mode.

• Follow the APP inst actions to set the W Fi.

• After the setting is completed, you can cont of the robot through the APP Tech out.

• By using the APP Tecbot, you can select the cleaning mode, s schedule. setting the cleaning time frame, mon to ring the system, receiving g the message, and more.

• You can connect the Amazon Alexa or Google Assistant by following the APP instruction.

Product Using /Start Cleaning

The robot has multiple cleaning modes, you can change the mode through the robot remote control, or APP.

Auto-cleaning

• Application scenario: Smart S shape deaning route.
• Setting on a standby mode, press the button on the robot, or the button on the remote control will start Ato cleaning made

Warm Prompt: when you use the robot dean only a single room, please dose the door and make Sure t only runs in this room, if there is no charging dock station in the room, it l returns to the place where it starts.

Edge Cleaning

Application Scenario: The robot nuns on the edge of walls into comers, after the edge cleaning is completed, it vill returns to the charging dock station. Settings: Press the button on the remote control, and it will start the edge cleaning.

Spot Cleaning

Application Scenario The robot runs on the edge of walls into comers, after the edge cleaning is completed, it will return to the charging dock station. Settings Press the button on the remote control, and it will start spot deaning.

Warm Prompt

When you try to add the water or the robot got stuck during the deaning process, please keep the robot stay in a range of less 1-meter radius so that the robot will continue to finish the remaining work.

Product Using / Main brush & inlet

Application scenario

The main brush is applied for the foods that have more debris or carpet. The suction inlet is more suitable for pet hair. Disassembly method: push the main brush release button on both sides and take out the main brush oover Lit up the main brush from the left side and take it out. Use the cloth to clean the dust inlet.

Disassembly method

push the main brush release button on both sides and take out the main brush Lit up the main brush from the left side and take out. Use the cloth to clean the dust inlet.

Using water tank

Warm Prompt: do not use the mop when the robot work on the carpet when the robot cleaning the har devoid foor, please pay the attention to the water level in the tank, fill the water in time, when yout nyto add the water, pleas e remove the water tank from the robot. when charging. remove the water tank and replace it with the dustbin.

• In order to extend the lifetime, we suggest you use pure water or soten ed water.
• Please do not use the mop on the carpet floor.
• When you try to add the water or dean the mop during the clean ani ng process, please keep the robot stay in a range of less 1-meter radius.
• After finishing mopping the floor, please empty the water tank and remove the mop.
• Stick the mop on the bottom of the water tank, open the plug, injured the water slowly, dose the plug

Regular Maintenance

Warm Prompt: Please turn off the pouwerwuh en you please clean the fite rs once a week, usually change a new fiter 1-2 months The sponge fitter and filter net can be washed, but the high-efficiency fitter is not washable clean and the robot and its access or ies

Troubleshooting

Products Parameters

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference en ce received, including interference that may cause undesired operation. Changes or modifications, not expressly approved by the party responsible for compliance could void the user’s author city to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference en ce in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter reference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following means ur es -Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Cors ut the dealer or an experienced radiative technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>