Tecbot TL-02N Robot Vacuum Cleaner User Manual

: June 5, 2024
: Tecbot

Tecbot TL-02N Robot Vacuum Cleaner

Tecbot TL-02N Robot Vacuum Cleaner product

Important Safety Instructions

Before using this product, please read the following safety instructions and follow all normal safety precautions. This device can not be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of this device in a safe way and understand the hazards involved.

Children should be supervised to ensure they do not play with this device.
Cleaning and maintenance shall not be performed by children without adult supervision.
This device is only to be used with the power supply unit provided.
For the purposes of recharging the battery, only use the detachable power supply unit provided with this device.
The battery must be removed from this device before this device is disposed of. To remove the battery from this device, first remove the screws on the bottom, then remove the main PCB and unscrew the battery cover using a screwdriver. Remove the battery by disconnecting the quick connector.
The used battery should be placed in a sealed plastic bag and disposed of safely according to local environmental regulations.
The external flexible cable or cord of the power supply unit cannot be replaced; if the cord is damaged, the power supply unit shall be disposed of.
This device is for indoor use only.
This device is not a toy.
Do not sit or stand on this device. Small children and pets should be supervised when this device is operating.
Store and operate this device in room temperature environments only.
Clean with a cloth dampened with water only.
Do not use this device to pick up anything that is burning or smoking.
Do not use this device to pick up spills of bleach, paint, chemicals, or anything wet.
Before using this device, pick up objects like clothing and loose paper.
Lift up cords for blinds or curtains, and move power cords and fragile objects out of the way. tf this device passes over a power cord and drags it, an object could be pulled off a table or shelf.
If the room to be cleaned has a balcony, a physical barrier should be used to prevent access to the balcony and to ensure safe operation.
Be aware that this device moves around on its own. Take care when walking in the area where this device is operating to avoid stepping on it.
Do not operate this device in areas with exposed electrical outlets on the floor.

Warning

Only certified technicians may disassemble the product. Users are not allowed to disassemble or repair the product.
Only use the AC adapter provided by the factory. Using other AC adapters may cause electric shock, fire or product damage.
Do not touch the power cord, plug or adapter when your hands are wet.
Keep loose clothing and fingers away from being drawn into the product’s wheels.
Keep the robot vacuum away from all flammables.
Never clean the robot while it is on the charging dock or plugged in directly. Unplug the robot and tum off power switch when cleaning.
Keep the AC power cord tucked away from becoming damaged in any way.
This product is to be used only indoors. Not intended for outdoor use.
Do not sit on top of the product or attach an object on the top of it.
Do not use this product in wet or moist environments.
Before use, remove all the objects that could get caught in the brushes or suction passage.
Do not place this product on furniture or platforms where it can fall and be damaged.
Tum the power switch off when not in use for a long period of time or when transporting the unit.
To avoid battery damage please check whether adapter and outlet are properly connected.
To avoid any tripping hazards or injuries please inform all the people in the house when this product is in use.

Packing list

The robot (including a dustbin)

Charging dock

Remote control (including 2 AAA battery)

User manual

Water tank (option)

Mop (option)

Side brush 2

HEPA(Hlgh efficiency partlculate air Filter)

Adapter

Cleaning Tool

Virtual boundary magnetic stripe (option)

Top view

Bottom View

Charging dock

Remote Control

Product Using / Note

Please place the furniture properly before using the robot and remove the other things like the wires and toys on the floor.

Please step away from the doorway or aisle in order to let the robot work efficiency.

Please do not take the robot by one hand, in case of the falling when press the water tank release button.

If the robot comes close to the edge of the stairs, or the small space among the furniture, please place the fence in order to runs smoothly. Please do not use the mop on the carpet floor, if there is carpet tassels, draw it to the bottom of the carpet.

Product Using / Charging

Put the charging dock against the wall in a flat floor and connect it to the adapter

Tum on the power

Mount the side brushes

Charging

Place the charging dock against the wall, make sure there is 2 meters free space in front of the dock, 1 meter free space on the right and left. Connect the charging dock to the adapter. Mount the side brush: press the side brush to the slot, you will hear a click sound, that means the installation is completed. Tum on the power button: switch it on from the bottom of the robot 1 is onH, O is off. Charging: put the robot on the charging dock station, make sure the charging contact points connect well, when you hear beep it means start charging. During the cleaning process, when the robot battery gets low, it will return to the charging
dock station automatically. You can just press the @ on the robot or remote control, it will return to the charging dock station.

Tecbot TL-02N Robot Vacuum Cleaner 30

App Download and Network control

In order to make good use of the robot, we suggest that you to use the APP to control the robot.Before start, please confirm

Your smartphone or tablet connected to the Wi-Fi.
IOS 8.0 or later.
Android 4.4 or later.
Support 2.4G Wi-Fi.
Wi-Fi indicator blinks quickly.
The robot is charging on the charging dock or the battery is in a high level.
Search Tecbot on IOS App Store or Google Play Store.

If connection failed, check the following

Make sure the router is in networking.
Make sure the Wi-Fi password correct.
Only support 2.4G Wi-Fi.

Add the robot in the APP and connect to Wi-Fi

Download the Tecbot APP from the I0S APP store or Android Google Play. Go to the Tecbot APP and create your account. Hit the Robot icon on the left-bottom comer to add the robot, scan the QR code on the side of the robot.

Wi-Fi settings

Press and hold the button for 3-5 seconds, you will hear beep that means the robot is on the connection mode, the button blinks quickly, follow the APP instructions. lf the above setting failed, select the compatible mode.

Follow the APP instructions to set the Wi-Fi

After the setting completed, you can control the robot through the APP Tecbot. By using the APP Tecbot, you can select the cleaning mode, scheduling, setting the cleaning time frame, monitoring the system, receiving the messages and more.You can connect the Amazon Alexa or Google Asistant by following the APP instruction.

Tecbot TL-02N Robot Vacuum Cleaner 33

Product Using / Start Cleaning

The robot has multiple cleaning modes, you can change the mode through the robot, remote control, or APP.

Auto cleaning

Application scenario : Smart S shape cleaning route. Setting: on a standby mode, press the button on the robot or button on the remote control, it will start Auto cleaning mode.

Tecbot TL-02N Robot Vacuum Cleaner 34 Warm Prompt
When you use the robot clean only in a single room, please close the door and make sure it only runs in this room, if there is no charging dock station in the room, it will returns to the place where it starts.

Edge Cleaning

Application Scenario
The robot runs on the edge of walls into comers, after the edge cleaning completed, it will returns to the charging dock station.

Settings
Press the button on the remote control, it will start the edge cleaning.

Spot Cleaning

Application Scenario
The robot runs on the edge of walls into comers, after the edge cleaning completed, it will returns to the charging dock station.

Settings
Press button on the remote centrer, it will start spot cleaning.

Warm Prompt

If the pausing lasts more than 60 minutes, the robot will forget the previous memory, and it will start cleaning in the beginning. When you try to add the water or the robot got stuck during the cleaning process, please keep the robot stay in a range of less 1 meter radius, so that the robot will continue to finish the remaining work.

Product Using / Main brush & inlet

Tecbot TL-02N Robot Vacuum Cleaner 39

Application scenario

The main brush applied for the floors that has more debris, or carpet. Suction inlet is more suitable for the pet hair.

Disassembly method

Push the main brush release button on both sides and take out the main brush cover.
Lift up the main brush from the left side and take it out.
Use the cloth to clean the dust inlet.

Using Water tank

Warm Prompt: do not use the mop when the robot work on the carpet, when the robot cleaning the hardwood floor, please pay attention to the water level in the tank, fill the water in time, when you try to add the water, please remove the water tank from the robot. When charging, remove the water tank and replace it with the dustbin.

In order to extending the lifetime, we suggest you to use the pure water or softened water.
Please do not use the mop on the carpet floor.
When you try to add the water or clean the mop during the cleaning process, please keep the robot stay in a range of less 1 meter radius.
After finish mopping the floor, please empty the water tank and remove the mop.
- Stick the mop on the bottom of the water tank, open the plug, inject the water slowly, dose the plug.

Tecbot TL-02N Robot Vacuum Cleaner 41

Press the dustbin release button, take out the dustbin, and replace it with the water tank.

Tecbot TL-02N Robot Vacuum Cleaner 42

Regular Maintenance

Warm Prompt : Please tum off the power when you clean the robot and its accessories.

Dustbin

Remove the dustbin.

Open the cap of the dustbin.

Empty the dustbin.

Tips: please clean the filters once a week, usually change a new filter 1-2 months. The sponge filter and filter net can be washed, but the high efficiency filter is not washable.

Filter

Remove the high efficiency filter, sponge filter and high efficiency filter.

Use the cleaning brush to clean them.

Tecbot TL-02N Robot Vacuum Cleaner 47

Put the filter net, sponge filter and high efficiency filter back to the dustbin, and close the dustbin cap.

Clean the main brush & side brush

Clean the main brush use the cleaning tool.

Remove the side brush, use the cloth to clean it.

Clean the caster wheel & sensors

Clean the caster wheel with the cleaning brush.

Clean the dust on the sensors, make sure it works properly.

Troubleshooting

Serial Number	Malfanction	Likely cause	What to do

1

|

Robot will not charge

| Robot has not made a connection with the charging dock| Be sure that robot’s charging contacts have made a connection with the charging dock pins
Charging dock is unplugged while the robot Is powered ON, which causes battery consumption| Plug in the charging dock and ensure the robot is powered ON, keep the robot on the

charging dock to make sure it has a full battery to work at any time.

2| he robot could not

returns to the charging dock

| The charging dock may placed in a wrong position.| Please refer to the Robot Charging

3

|

The robot gets into trouble while working

| The robot Is tangled with something on the floor electrical cords, drooping curtains, carpet fringe etc.

Side brush is stuck or the rotation speed of the side brush decreases.

| The robot will try various ways to get itself out of trouble, if it is failed, manually remove the obstacles and restart.

Remove the debris tangled around the side brush, if the side brush still rotates slowly, contact the customer service.

4

|

The robot returns to the charging dock before it finishes the cleaning.

| When battery power gets low, the robot automatically switches to return to charger mode and returns to the charging dock to recharge itself.

Working time varies according to the floor types, room complexity.

|

This is normal, no solution necessary.

5

|

Remote control failure effective control range of remote control is 5 meters)

|

The robot is powered off.

|

Power ON the robot.

Time scheduling is cancelled.

|

Set time scheduling.

Serial

Number

| Malfan c tion| Likely cause| What to do
---|---|---|---

6

|

Remote control failure effective control range of remote control is 5 meters

| The batteries In the remote control need to be replaced.| Replace the new batteries and make sure they are Installed correctly.
The robot is powered off or the robot’s battery is low.| Make sure the robot is powered ON and fully charged.
The infrared signal cannot transmitted because the infrared emitter on the remote control or the robot’s infrared receiver

is dirty.

| Use a dry cloth or multi-function cleaning tool to wipe the infrared emitter on the remote control and the infrared receiver on the robot.
There is other equipment interfering with the infrared signal to the robot.| Avoid using the remote control near other equipment using infrared signals.
Use the remote control under the strong light| Avoid the strong light when using the remote control.

7

|

No water leaking after the mop installed.

|

No water in the water tank

The water outlet on the robot bottom is blocked.

|

Add the water in the water tank.

Cleaning the water ouUet or the water tank filter.

8

| The robot cleaning route is irregular and missed some area cleaning, APP shows the irregular route.|

Something on the floor like the electrical cords, slipper.

|

Remove the electrical cords and other sundries before start the deaning job.

|

The robot cleans the some area repeatedly and missed other area.

| The robot will cover the the missed area automatically.| When the robot working, please do not interfere It do not move It or block the way artificially.
Due to the various surroundings in a house, the robot detection angle vareis.| Place the robot to the position where it started.
10| The robot generates loud noise when working.| Side brush, main brush tangled, dustbin and filters blocked.| Clean and maintain the side brush, main brush, dustbinand filters.