Tecbot Robot Vacuum Cleaner User Manual
- June 7, 2024
- Tecbot
Table of Contents
Tecbot Robot Vacuum Cleaner User Manual
Install the Charging Dock
- Place the Charing Dock against the wall.
- Connect the Adapter to Charging Dock and outlet.
- Leave an area on each side of Charging Dock (1x1x1.5m/3.3×3.3x5ft)
Wake up your Robot
- Remove the two protective foams on the both sides of body.
- Turn on the power switch at the side of body.
- I: ON O: OFF
Charging your Robot
-
2 ways to charge
a. Use charging dock
b. Use adpater directly -
Charging status:
a. When charging, flashes (red).
b. Charging completed, turns green. -
Note : Fullly charge it when you just receive it.
USE
- a. Press on the robot to start directly.
- b. Press on the remote control to start directly.
- c. APP remote control
1. Download “Tecbot”.[ **Google Play**](https://play.google.com/store/apps/details?id=com.grit.tecbot&hl=en&gl=US) & [**App Store**](https://apps.apple.com/us/app/tecbot/id1483318466)
2. Add a device after you register. 
3. Scan the QR code on the side of the body. 
4. Connect to the WiFi (only support 2.4Ghz) 
5. Connect to your Robot. 
6. Start to clean/remote control/schedule. 
Follow Us
Contact us
Whatsapp: +86-13827222904
Email: service@tecbot.ai
Website: en.tecbot.ai
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>