ZINGO RACING 9031 Remote Control Car Series Instructions
- June 6, 2024
- ZINGO RACING
Table of Contents
ZINGO RACING 9031 Remote Control Car Series
INSTRUCTION
Thank you for choosing our toys! Please read through this instruction manual
before use as it contains all the information you need to know about how to
correctly, joyfully use this product.
CAUTIONS:
Electric Product: Do not give this product to children aged 6 or below.
Like other electric products, this product is also to be used in a safe way to
avoid electric shock .
Adult’s Supervision Required
Warning! Do not try to modify this product, which may void your right to use
it.
Carefully remove items from package.
Switch both car and remote buttons to “I position. For best results use the car on hard surfaces such as wood Of tile.
The truck requires 3 “AA” 1. SV batteries (not included). When changing batteries. adult supervision is required. Use alkaline batteries for the best performance. Locate the battery compartment on the bottom of the truck and the side of the remote controller and remove the battery cover doors. Insert “AA 1.SV batteries in truck. and 2X1.SV”AA” batteries into the controller and replace the battery compartment doors and screws. Use tool to press the fastener and release the battery door fOf the remote controller
This device comp I ies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful I interference, and
- this device must accept any interference received, includeing interference that may cause undesired operation.
“Hereby, SHANTOU ZINGG HOBBY CO., LTD, declares that .this Remote contra I car series is in comp Ii ance with the es sent i a I requirements and other re I event prov is i and of Directive 1999/5/EC.
Manufacture Name: SHANTOU Z I NGO HOBBY CO., LTD
Manufacture Address : Fengxin Industrial Zone, Fengxiang Street, Chenghai
District, Shantou, Guangdong, China
SAFETY PRECAUTIONS
- Do not operate during thunderstorms or rain
- Avoid water, sand, and snow when operating car.
- Do not submerge car Of the controller in water.
- ever operate your car on lhe street or highway.
- ever operate your car in a confined or crowded area. and do not use people or animals as obstacles
- Do not run your car into furniture, objects or hard surface, as this will cause damage to both the objects and your car
- Keep fingers. hair and lose clothing away from the tires gears nd motor while the car is switched to ·o ·.
- Do not leave car or transmitter near the source of heat or under direct sunlight for long periods of bme.
- Do not leave car or transmitter outside overnight Dampness 1s harmful to interior components
- Remove all batteries when not In use to avoid accidental operation
- Adult supervision 1s recommended when operating this car.
NOTE: This equipment has been tested nd found to comply with the limits
for a Cl
These leaves ato designed to provide ro reasonable protection against
hannf\.C until rent in r Eldon I install tlon Th equipment ge ra os. uses and
can rad to radiofrequency energy nd, if not lnst&lled and used in accordance
“1th the instructions. may cause handful mterterenc:e to radio comm\Mlk:
talons, However. there s no gu grantee that Int lfereoce will not occur In a
particular installation If this equ pment does c&use h harmful interference IO
radio or televls4on re«pliOl’I. which c&n be det ermined by turning the
equipment off and on. lhO U$Cr Is encouraged to try to correct tho control
rent:e by one or fflOIO of thO following m OSl.l’OS’
- Reorient °’ relocate tile rece ng antenna.
- Increase the separation between the equipment and receiver.
- Consult the d ler or an exper1eoced radio/TV technician lo< help.
Warning. Changes or modifications to thlS unit not expreSSly approved by the party responsible for compliance could void tile user’s authority to operate the equipment
FCC rules
This device complies with Part 15 of the FCC rules. operation is subject to the following two conditions:
- this devk:e may not cause halTTiful interference received. including interference th t may c&uso undesired opinion KEEP THIS INSTRUCTlO MANUAL AS IT CO TAINS IMPORTANT INFORMATION FOR FUTURE
REFERENCE.
Due to IO con tenuous product Improvements. the pk:tures on this manual may
doff er sl,ghtl’f from the actual product.
Warning : Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/ TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>