ZINGO RACING 9032 Remote Control Car Series Instruction Manual

Instruction Manual

Main parameter

Content

Neme of components

Battery loading

1. Battery loading of the car: Please push the ON/OFF at the chassis of the car to the “OFF” position, use the screwdriver to unscrew the battery cover at the bottom of the car, and then open the battery cover, load 5xAA battens into the battery case accordingly by following the sign of “+_”, and then close the battery cover, use the screwdriver to wrench tightly the screws of the battery cover. (As diagram 1 )
2. Battery loading inside the controller: Open the battery cover, and then load 2XAA batteries into the battery case accordingly by following the sign of “+” “- ‘, and then close the battery cover and make sure safe and sealed.(As diagram 2 )
   

Operation

Please kindly confirm if the batteries are well loaded into the car and the controller before playing.
Step for switching on

1. Push the ON/OFF of the controller to the “ON” position, the power indicator of the controller will be “ON° and the controller will enter into the normal “ON” state. (As diagram 3 )
2. Push the ON/OFF of the car to the “OW position, the car will enter into a normal “ON” state.(As diagram 4 )

Forward & Backward:

1. PII the trigger of the controller and the car will run forward. (As diagram 5 )
2. Push the trigger of the controller and the car will run backward. (As diagram 6 )

Turn-right & Turn-left:

1. Rotate the steering wheel of the controller to the right, the car will be steering to the right.(As diagram 7 )
2. Rotate the steering wheel of the controller to the left, the car will be steering to the left. (As diagram 8 )

Running operation:

1. While rotating the steering wheel of the controller to the right or to the left, pull the trigger backward, the car will be steering to the right or to the left and run forward. (As diagram 9 )
2. While rotating the steering wheel of the controller to the right or to the left, push the trigger forward, the car will be steering to the right or to the left and run backward. (As diagram 10 )

Direction adjustment:
If the car can not run in a straight line, please adjust the steering trimmer for “Right/Left” at the bottom of the car to an appropriate position.(As diagram 11 )
Stop operation:

1. Release the trigger and steering wheel then the car will stop.
2. Pull the ON/OFF of the controller to the “OFF” position, the power indicator of the controller will be “OFF” and the controller will enter into an OFF state.
3. Push the ON/OFF of the car to the “OFF” position, the car will enter into the “OFF” state.

Operating precautions:

1. When playing with this car indoors, please pay more attention not to damaging the furniture or glass.
2. Please play this car on spacious ground or outdoor. Please DO NOT play this product on the road or in the crowd. Nor control this car to run toward people.
3. In the case of thundering weather, please stop playing immediately and remove the batteries in the controller and the car so as to keep safe.
4. Please DO NOT fold the antenna so as not to snap the antenna as the sharp part or sharp object may cause damage to the human body.
5. Please DO NOT pull the wire on the car body so as not to snap the wire and cause malfunction.
6. Please DO NOT close your hand to the rotating wheel so as to avoid being wounded. Also avoid the hair or clothes being curled inside, which may cause injury to the human body.
7. Please DO NOT disassemble or re-equip this car at will.
8. When there is insufficient power in this car, the car may appear slow-down obviously. This time please change the battery of the car in time.
9. When there is insufficient power with the battery of the controller, the car may be out of control. This time please replace the batteries of the controller.
10. In case the car, controller, or battery gets wet, please wipe it off as quickly as possible so as not to cause damage.
11. Please DO NOT litter around the car or collide it with other objects. When placing the car, please do keep it far away from the fire source or high-temperature area.

Precaution on the battery

1. Please remove or load the batteries in the correct way.
2. Please DO NOT mix the batteries of different types. Old batteries ARE NOT TO be mixed with the old ones.
3. Non-chargeable battery IS NOT TO be recharged.
4. Rechargeable batteries can only be charged under the guidance of an adult.
5. Please remove the battery from the car before charging.
6. Please make sure to load the batteries as per the correct “+” “-“polarity.
7. Exhausted batteries are to be removed from the controller or car.
8. The positive end and negative end of the battery are NOT to be short-circuited
9. Batteries are to be placed far away from the fire source or places with high temperatures.
10. Please unload the batteries when do not use the controller or the car for a long time.

Attention

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  Hereby declaring that our products are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

WARNING:
CHOKING HAZARD-Small parts. Not for children under 3 years.

Documents / Resources

| ZINGO RACING 9032 Remote Control Car Series [pdf] Instruction Manual
9032, 2ASGE9032, 9032 Remote Control Car Series, 9032, Remote Control Car Series
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>