LENA LIGHTING Pelican Evo LED Luminaire Instruction Manual
- October 27, 2023
- LENA LIGHTING
Table of Contents
LENA LIGHTING Pelican Evo LED Luminaire
FUNCTION AND USE
- This product uses high-powered rechargeable, environment-friendly, non-memory Li-battery.
- This product has the characteristics of novel design, easy to take, high brightness, long-distance visualization, long life and long working time.
- This product is designed for outside and inside use, for long journey, outside working, field exploration, field searching, it is the first choice for working at night or camping outdoor.
- Options of the switch: 1st push – main light LED 5W, 2nd push – main light 4 x SMD (low), 3rd push – main light 4 x SMD (high) 4rd push – on main light 4 x SMD + 5W (MAX), 5th push- front light (high), 6 push – OFF.
SAFETY PRECAUTIONS
Do not use the lamp in the immediate vicinity of inflammable materials or gases. Make sure that the illuminants are not covered during use. Only use the accessories included with the product for recharging your rechargeable workshop lamp. Keep the lamp out of reach of unauthorised persons, especially children. Do not point the light directly in your own or any other person’s or animal’s eyes. Always check the mains cable before you use the charger. If the mains cable is damaged, replace the charger.
TECHNICAL DATA
- Ingress protection class: IP20
- 3.7V rechargeable battery Li-ion 2600mAH
- Working panels: 5W + 4x1W SMD (main light) – 2W LED (front)
- Working time: 6h (Main Light – max)
- Charging time: 6h
- Protecion class: III
- Power supply: input 100-240V 50/60Hz / output 5V 1A
- Please pay attention that the magnet inside the lamp can attract metal / iron objects
CHARGING USING THE 100-240V MAINS UNIT
Plug the power supply into an ordinary 100-240V AC mains power socket. Plug the charger cable into the corresponding socket on the handgrip. The green LEDs will be blinking while charging. Once the batteries are completely charged,the LED turns green
INSTALLATION INSTRUCTIONS
