LENA LIGHTING Astra LED S Astra LED Light Instruction Manual
- May 15, 2024
- LENA LIGHTING
Table of Contents
LENA LIGHTING Astra LED S Astra LED Light
Product Information
Specifications:
- Model: ASTRA LED S
- Input Voltage : 230 V
- Frequency: 50 Hz
- Weight: 1.3kg
- Cable Requirement : min. H07RN-F 3×1.5mm
- Surface Area: 0.0637 m2
Product Usage Instructions
Installation
Ensure the power supply is disconnected before installation. Follow these
steps:
- Mount the ASTRA LED S securely in the desired location.
- Connect the cable following the specified requirement (min. H07RN-F 3×1.5mm).
- Ensure proper grounding to avoid electrical hazards.
Powering Up:
After installation, follow these steps to power up the ASTRA LED S:
- Connect the product to a 230 V power source with a frequency of 50 Hz.
- Switch on the power and verify that the light functions properly.
Maintenance:
Regular maintenance will ensure optimal performance. Here are some tips:
- Clean the surface of the ASTRA LED S regularly to prevent dust accumulation.
- Check for any loose connections or damage to the cable.
- Replace any faulty components promptly to maintain efficiency.
FAQ (Frequently Asked Questions)
-
What should I do if the light does not turn on after installation?
Check the power supply connection and ensure the cable meets the specified requirements. If issues persist, contact customer support for assistance. -
Is it safe to install the ASTRA LED S outdoors?
The ASTRA LED S is suitable for outdoor use, but ensure it is installed in a location protected from direct exposure to harsh weather conditions.
CAUTION
- Assembly should be carried out by a qualified person.
- Dirtiness that settle down on the diffuser due to normal operation of the fitting shall be cleaned with a damp cloth. Do not use abrasive cleaners.
DISPOSAL
- We onent with signora crossed-our waste container: in accordance with the European Directive 2002196/CE and Polish Act on used electric and electronic
- This mark informs abort the fact that the device, after its application use, cannot be placed together with other types of household waste. The user is obliged to return iteated prote system making i possible for the return oft l equipment. Proper reele with uses lectricing electronic equipines, contributes to the avoidaties of damaging consequences for the health of the inhabitants and natural environment chick result form the presence of dangerous substances and improper storage and processing of such devices and equipment.
INSTALLATION INSTRUCTION
DIMENSION
WARNING
- In order to avoid risk, if the external flexible cord is damaged, it should only be replaced by the manufacturer or its service agent, or a similarly qualified person.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- ATTENTION! The product in protection class Il cannot be used in the case of non-metallic poles. When using a metal pole, it is necessary to ground it.
AOUT COMPANY
- LENA LIGHTING S.A.
- ul.Kornicka 52, 63-000 Sroda WIkp.
- POLAND
- tel. +48 61 28 60 300
- e-mail: office@lenalighting.pl
- www.lenalighting.pl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>