mission MSB21 2.1 Channel Soundbar with Wireless Subwoofer User Manual

: June 6, 2024
: MISSION

Table of Contents

Important Safety Instructions
What’s in the box
Remote control
Identifying the Parts
Connections
Basic Operation
Wall Mounting
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MSB21 2.1 Channel Soundbar with Wireless Subwoofer
User Manual mission MSB21 2 1 Channel Soundbar with Wireless
Subwoofer mission MSB21 2 1
Channel Soundbar with Wireless Subwoofer - dolby

Before using the soundbar, please read this manual thoroughly and retain it for future reference.

Important Safety Instructions

| CAUTION
THE RISK OF ELECTRIC SHOCK DOES NOT OPEN|
---|---|---

The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to person.

Safety

Read these instructions – All the safety and operating instructions should be read before this product is operated.
Keep these instructions – The safety and operating instructions should be retained for future reference.
Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions – All operating and usage instructions should be followed.
Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool and the like.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel.
Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to the electrical earth.
The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
The minimum distance around the apparatus for sufficient ventilation is 5cm.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc…
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Batteries should be recycled or disposed of as per state and local guidelines.
The use of apparatus in moderate or tropical climates.

Caution:

Use of controls or adjustments or performance of procedures other than those described herein may result in hazardous radiation exposure or other unsafe operation.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus.
The mains plug/appliance coupler is used as the disconnect device, the disconnect device must remain readily operable.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

Warning

The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
Do not place this unit close to strong magnetic
Do not place this unit on the amplifier or receiver.
If any solid object or liquid falls into the system, unplug the system and have it checked by qualified personnel before operating it any
Do not attempt to clean the unit with chemical solvents as this may damage the finish. Use a clean, dry or slightly damp cloth.
When removing the power plug from the wall outlet, always pull directly on the plug, never yank on the cord.
Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment.
The rating label is pasted on the bottom or back of the equipment.

Battery usage CAUTION
To prevent battery leakage which may result in bodily injury, property damage, or damage to the apparatus:

Install all batteries correctly, + and – as marked on the apparatus.
Do not mix old and new batteries.
Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
Remove batteries when the unit is not used for a long time.

Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

We hereby declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

What’s in the box

mission MSB21 2 1 Channel Soundbar with Wireless Subwoofer - figure
1

Remote control

mission MSB21 2 1 Channel Soundbar with Wireless Subwoofer - figure
2

Replace the Remote Control Battery

Press and slide the back cover to open the battery compartment of the remote control.
Insert two AAA size batteries (included). Make sure the (+) and (—) ends of the batteries match the (+) and (—) ends indicated in the battery compartment.
Close the battery compartment cover.

Do not mix old and new batteries;
Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.

Identifying the Parts

mission MSB21 2 1 Channel Soundbar with Wireless Subwoofer - figure
4

Main Unit

mission MSB21 2 1 Channel Soundbar with Wireless Subwoofer - figure
5

Display Window
Show the current status.
Remote Control Sensor
Receive signal from the remote control.
Wall bracket screws
(ON/OFF) button
Switch the unit between ON and Standby mode
(SOURCE) button
Select the play function.
Play/pause/resume playback in Bluetooth/mode.
Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
VOL+/VOL- buttons
Increase/decrease the volume level.
AC Socket
COAXIAL Socket
OPTICAL Socket
USB Socket (Service only)
The USB socket is for service only.
AUX Socket
Connect to an external audio device.
HDMI OUT (ARC) Sockets
Connect to a TV via HDMI cable.
HDMI 1 / HDMI2 Sockets
Connect to HDMI OUT socket of external devices (e.g. games consoles, DVD players, and Blu-ray).

Wireless Subwoofer mission MSB21 2 1 Channel Soundbar with Wireless
Subwoofer - figure 6

AC~ Socket Connect to power.
PAIR button
Press activate the pairing function between the main unit and the subwoofer.
PAIR Indicator
Light up solidly when the pairing succeeds.

Connections

mission MSB21 2 1 Channel Soundbar with Wireless Subwoofer - figure
7

Before connecting the AC power cord, ensure you have completed all other connections.

mission MSB21 2 1 Channel Soundbar with Wireless Subwoofer - figure
8

Pair up with the subwoofer
The subwoofer and the soundbar will be paired automatically when both are powered on.
Both Soundbar & Subwoofer will connect automatically wirelessly. The Soundbar is now ready to use.
(Manual reset for wireless pairing for Subwoofer at subwoofer back panel).

mission MSB21 2 1 Channel Soundbar with Wireless Subwoofer - figure
9

Basic Operation

Standby/ON
When you first connect the main unit to the main socket, the main unit will be in Standby mode.

Press the button on the unit or on the remote control to switch the unit ON.
Press the button again to switch the unit back to STANDBY mode.
Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.

Auto Wake
If a TV or an external device is connected (AUX/ HDMI ARC), the unit will switch on automatically when the TV or the external device is switched on.
Automatic Power Off Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the external unit is disconnected, and switched off.
Select Modes
Press the (SOURCE) button repeatedly on the unit or on the remote control to select the AUX, OPTICAL, COAXIAL, HDMI, HDMl2, HDMI ARC, and BT (Bluetooth) modes. The selected mode will show on the display.

Adjust the Bass/Treble Level

Press TREBLE then press the +/- button to increase or decrease the treble. (TREBLE +6/ TREBLE -6)
Press BASS then press the +/- button to increase or decrease the bass. (BASS +6/ BASS -6)
After about 5 seconds, the unit will exit from the bass/treble setting.
The display will show the currently selected mode. You may now press the + /- buttons to adjust the volume.

Turn the Surround Sound ON/OFF
Press the (Surround) button on the remote control to turn on the surround sound. Press this button again to turn off the surround sound.

Adjust the Volume
Press the +/-(VOL) buttons on the unit or on the remote control to adjust the volume.
If you wish to turn the sound off, press the (MUTE) button on the remote control. Press the (MUTE) button again or press the VOL+/VOL- buttons on the unit or on the remote control to resume normal listening.

Adjust the Brightness
Press the (DIMMER) buttons on the remote control to select the brightness level.

Select Equalizer (EQ) Effect
While playing, press the (EQ) button on the remote control to select desired preset equalizers: MOVIE, MUSIC, NEWS.

Wall Mounting

mission MSB21 2 1 Channel Soundbar with Wireless Subwoofer - figure
10

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.

Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Dolby Audio Speaker System is a trademark of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012–2020 Dolby Laboratories. All rights reserved.

IC Notice
This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

FCC &IC Warning
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.