Shenzhen Mission Electronic H15 Helmet Bluetooth Headphone User Manual
- June 6, 2024
- Shenzhen Mission Electronic
Table of Contents
Shenzhen Mission Electronic H15 Helmet Bluetooth Headphone
SAFETY WARNING
- The device is only IPX6 life waterproof, please do not put it under water or using it in the rain
- Please do not expose the product into acid, alkaline or hard and pointy objects when using
- If the product is wet or damp by rain, or moldy, please place it in a low-temperature dry place, do not insolate or put into the oven and other high-temperature places
- Please do not throw the device and its battery into the fire
- Please do not disassemble, repair or refit the product
- Please do not pull or throw the product
SPECIFICATIONS
- Bluetooth Version: V5.2+EDR
- Frequency Response: 2.402GHz-2.480GHz
- Bluetooth Distance: 20M
- MIC distance: s:1M
- Lithium Battery : 3.7V/400mA
- Charging Time: 100 minutes
- Standby Time: 400 hours
- Working Time: 40 hours (70% volume)
- Bluetooth Matching Name: Helmet Headphone
FEATURES
- Bluetooth V5.2+EDR version, available for most of devices with Bluetooth function
- Automatically answer in-coming call, and support to refuse the call by hit any buttons 2 seconds when phone call in
- Support display battery on phone
- Support 1-driven-2 mode
Pairing Steps
Under power-off status, press and hold the MFB until the indicator light flashes red and blue alternatively,then the Headset enters the pairing mode;
Turm on Bluetooth on your mobile, and search “Helmet Headphone” and connect. Turn off Bluetooth of the mobile.and repeat the step above to connect with the second mobile.
Important Features
Power on – Press and hold the multifunction button (MFB) for 3s until the BLUE light flashes , Power off- Press and hold the MFB for Ss till the RED light on for 2s;
Call answer-Answer by your phone or press any button to answer the call or automatically answer after 1 Ss
Call end – End by your phone or press the MFB;
Call reject-Reject by your phone or press any button for 2s
La st Numb er Redia
Last number redial – Quickly tap the MFB twice to redial the last dialed phone number;
Play music – Press the MFB to play/pause music under music playing status;
Track Control
Track control-Tap the “Volume+” button skip to the next song;Tap the “Volume-” button to play the previous song; Volume Adjust [(]>))
Volume adjust – Press and hold the “Volume+” or “Volume -” button to increase or decrease the volume.
When the device is working, tap” ►II’ button 3 times, and hear “DU” at the same time. then it can start “Siri” voice assistant. Other Functions and Features Low Power Warning The device sound “Dong Dong·warning voice while working, it means the power is low, please charge it 1 Drive-2 Mode Firstly, Phone 1 pair with Helmet Headphone, then tum off the Bluetooth of phone 1; Second, phone 2 pair with Helmet Headphone Third,turn on Phone 1 Bluetooth and re-conned it with the device Now Phone 1 and Phone 2 paired with Helmet Headphone together, support to answer any call from two phones (Phone 1 and Phone 2 can not answer calls at the same time.)
Installing Step
- Step1: Take out the Helmet headphones from the color box, stick the “Magic Tape “on both earphones
- Step2: Tear off the 3M tape paper of the earphones, and stick it into the helmet ear position of both sides, before sticking it, please align the position well,see Fig3
Accessories
- Helmet Headphone*1 pc
- USB Charging Cable*1pc
- User Manual *1 pc
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/1V technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.