MYBUCK JBH09 True Wireless Stereo Headset User Manual

MYBUCK JBH09 True Wireless Stereo Headset User Manual

JBH09 Stereo Bluetooth headphone package list

• Stereo Bluetooth Headphone x 1 PCS
• 3.5mm Audio Cable x 1 PCS
• Type-C Charging Cable x 1 PCS
• JBH09 User Manual x 1 PCS

Function Buttons

Power Switch operation:

1. When the power is off, press and hold the MF button for about 3 seconds. At the same time, there is a ‘power on” sound, and it will be automatically enter the pairing mode, there Is a ‘pairing’ ringtone meanwhile, The red and blue lights will flash alternately. At this the Bluetooth headset can be discovered by other devices.
2. In the power-on mode, press and hold MF for about 5 seconds, and there will be a ‘power off” ringtone, the red light will be on, and It will be off after 2 seconds.

Answer the phone:

Pressed the MF button for one the during an Incoming call.

Reject the call:

Pressed MF- buttons for – 2 seconds till hearing beep sound when you are in incoming calls.

Toggle tones

When the headset is powered and paired, double- click ho ‘M=  button’ to switch between Chinese and English ring to.

End the call

Pressed the Mr button for 1 time during the call.

Call wafting

During a call, when there is a second incoming call, double-click the ‘MF” button once to keep the first call, to answer the second call Double-click the ”MF button” again to keep the second call and answer the first call Single Click the’MF button’ to hang up the current call and connect to the second call.

Siri function : In the Bluetooth connection node, long press the MF button for about 2 seconds to activate the sill function (only for Apple products)

3.5 mm audio cable usage : After Install the 3.5 mm and cable, the Bluetooth function of the headset is automatically turned off, and he headset can be used as a wired headset.

Note the following items

1. Please use to reasonable control of to time and the volume of the headphone.
2. If The environment such as thunder storm) are potent ally dangerous, please stop using to ensure safety. 3.Don’t use the headphones to listen to music or calling or while driving In potentially dangerous environment, In order to avoid distracting.
3. Place the headphone out of the reach of children to avoid Improper use may cause deadly danger.
4. Do not watering inside the headphone, to avoid sound or electronic damage.
5. Continue to increase the volume should be avoided cause you do rot hear the sound around,such as tinnitus or turn up the volume to high, please transferred to the appropriate volume.
6. Feels obvious discomfort, Irritation or other adverse reactions, should stop using Immediately.

Warning

1. While in charging process please don’t use to avoid electrocuted,
2. Built In rechargeable batten/ Is not removable. Do not try to remove battery from headphone, otherwise it could be damaged.

Charging

1. While charging the headphone power will be shutted down.
2. Plug type-C n the headphone jack, then connect with computer use hub or adaptor. red led MI be lighted always.
3. Charging time about 2.5 hours; blue led will be lighted always when charge complete.

Bluetooth connection steps

1. Please control the distance between the Bluetooth headset and the mobile phone (or other devices used for connection) within 1 meter
2. In the power off mode, press and hold the MF button for about 3 seconds, and It will automatically enter the pairing mode when It Is turned on for about 5 seconds. The Bluetooth automatically pairing till successful while powered, and there will be a “connected” ringtone.
3. Open the mobile phone Bluetooth search “JBH09° and click to connect automatically.

Precautions:

1. If the headset has been connected to a mobile phone before, pressed 2 seconds to turn it on again, and it will be automatically connect to the last connected device. if there is no connected device around the headset after it is turned on, it will automatically enter pairing after 10 seconds Mode, it is convenient for users to pair with new devices (devices That have not been connected). Of course, the headset also supports long press for 5 seconds to enter the pairing mode directly after turning on the device. After turning on the device, It directly enters the pairing mode and repeats the above Bluetooth connection steps till successfully pair.
2. it is only 3 minutes after entered pairing mode . The headset will automatically turn off if timeout. Please restart it to re-use it again.

Re-connecting after the Bluetooth headset disconnected:

1. When the connection range is exceeded, the Bluetooth will be disconnected and there will be a ‘disconnected’ ringtone. After entering the connection range again within 3 minutes, the Bluetooth will automatically connected with the ‘connected’ ringtone.
2. If you operate the phone directly and turn off the phone’ s Bluetooth, the Bluetooth headset will automatically enter the pairing mode.

Low battery alarm

When the headset is turned on and the power Is lower than 3.3V, there will be a “low battery’ reminder

Play / Pause

When you are In playing music, single click the MF button

Volume adjustment

When the music Is playing, short press the volume up button to Increase the volume. When the volume Is adjusted to the maximum, there will be a “di’ sound. When the same music is playing, short press the volume down button to decrease the volume.

Specification

• Working distance: 10 meters Horn diameter and Impedance: diameter ohm
• Charging time: 2.5 hours
• Use environment temperature: -10-60 ‘ C
• Net weight 180g
• Frequency Range: 20Hz-20KHz
• Battery: Lithium battery 317V/500mAh
• Standby time: 100 hours
• Audio Input cable: 3.5mm plug audio cable
• Play music/talk time: more than 20 hours
• Support A2DP/AVRCP/HSP/HFP Charging environment temperature: 0-45 degrees
• Bluetooth version: 5.0

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF exposure compliance statement : This device has been evaluated to meet the general RF exposure requirement

Please read the user manual carefully before use, Follow the instructions of this manual to operate. Such product technology or software upgrade without notice

Frequently question

Button have no function : Please use the player switch is the smart phone’s player. Can’t start : take off the Type-C charging and 3.5mm plug.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>