ION ISP111SCP Solar Rechargeable Outdoor Speakers With Multi-Sync User Guide
- June 6, 2024
- ION
Table of Contents
SOUND STONE PAIR
Quickstart Guide
v1.0
Sound Stone Pair Quickstart Guide
For the full User Guide and the latest information about this product, visit ionaudio.com. For additional product support, visit ionaudio.com/support. For complete warranty information: visit ionaudio.com/warranty.
Box Contents
- Glow Rocker™ Speakers
- 5V, 1A USB Charging Adapter
- Micro-USB Cables (32′ 80 cm, each)
- 1/8″ (3.5 mm) Stereo Auxiliary Cable (30″ / 75 cm, each) Quickstart Guide
Note: Before you first use the product, please fully charge the battery. Your unit was purposely shipped with a reduced battery charge to ensure safe transit. For optimal charging, power off the speaker while charging.
Features
A. Bluetooth® LED
B. Power/Linking Button
C. Micro-USB Charging Port: A solid red LED will appear to indicate that the
speaker is charging. When charging is complete, the red LED will turn off. For
the fastest charging. power off Glow Rocker and use the included micro-USB
cable to connect the speaker to (A) a USB power adapter (DC 5V, included)
connected to a power outlet, or (B) your computer (powered on).
D. Aux Input (Note: Audio from the auxiliary input will not be transmitted to
a linked speaker.
Outdoor Use and Care
Though Glow Rocker.” Pair is water-resistant and able to tolerate splashing water, please review these tips to get the best performance from Glow Rocker: Bring Glow Rocker”‘ indoors during extreme cold, heavy rain, or melting snow. Please do not place Glow Rocker h. in standing water. Please do not connect the charging adapter to Glow Rocker” in a wet environment. Keep any non-water- resistant devices (phones, music players, etc.) in a dry place where they will not be affected by water and cause a risk of electric shock. Make sure the charging port door is securely closed when using outdoors to ensure the IPX5 rating.
App Control
IMPORTANT: To ensure the best possible experience with the app, use the
most current Android OS or iOS on your device.
Note: Ensure that your device has Internet access via your service
provider or wireless connection. You can also download the app on your
computer, but remember to connect and sync your device to transfer the app.
Follow these steps to download the free app on your device:
- Open the Apple App Store or Google Play on your device. Then, search for the ION Sound XP app.
- Follow the on-screen instructions to download and install the app. Once downloaded, the ION Sound XP app will appear on your device’s home screen.
- Connect your device to Glow Rocker”‘ via Bluetooth. See the Bluetooth Connecting with Glow Rocker” to learn how to do this.
- Open the ION Sound XP”‘ app and tap to select Add A Product on the screen. The app will scan and find Glow Rocker.
- Select the Glow Rocker icon to go to the next screen, where you can control the speaker settings from your device.
For complete instructions on using the app, download the complete User Guide at ionaudio.com.
Bluetooth Connecting with Sound Stone
Connecting to One Sound Stone:
-
Power on the Glow Rocker”. by holding down the Power button for 2 seconds. Glow Rocker will automatically enter Bluetooth pairing mode indicated by the Bluetooth LED flashing blue.
-
Navigate to your device’s Bluetooth setup screen, and find Sound Stone. and connect. When connected, the Bluetooth LED will be lit solid blue and you will hear “Connected-.
Note: Do not connect to Glow Rocker,_BLE this is reserved exclusively for connecting to the ION Sound XP app. If you experience trouble connecting, select “Forget this Device” on your Bluetooth device and try to connect again. -
To disconnect, turn off Bluetooth from your device’s Bluetooth settings.
Stereo Linking Two Sound Stone Speakers
- With the first “primary” speaker powered off, press and hold the Power button for 6 seconds until you hear two short tones. The speaker will power on and enter stereo linking mode. Note: The first speaker will be the “primary” speaker, and play the Left channel. The second speaker will be the “secondary” speaker, and play the right channel.
- Press and hold the Power button for 6 seconds to power on the second “secondary- speaker. The two speakers will automatically link together. A successful link will be indicated by a solid green LED on the primary speaker, a solid red LED on the secondary speaker, and you will hear “Connected” from the secondary speaker. The LEDs are located next to the input ports on the speaker’s side panel.
- On your Bluetooth device, navigate to your Bluetooth settings menu, find Sound Stone, and connect. Once connected, you will hear ‘Connected” from the primary speaker.
Note: The Bluetooth range will be determined by the distance that your Bluetooth device is to the primary speaker. Glow Rocker Pairs should be within 32′ (10 m) of each other to properly link. See Technical Specifications for Bluetooth and Linking ranges.
Light Modes
Short press and release the Power button to cycle through colors
(white/red/blue/green). Each color has a solid-state and an active state. When
active, the LED will slowly fade in and out, and if music is playing, the LED
will flash to the beat of the music.
Note Power off the unit after use in order to conserve the battery. Glow
Rocker Pair will automatically power off after 30 minutes if no audio is
playing.
Important Safety Instructions
- Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
- Do not use this apparatus near water.
- Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-In” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper. tablecloths. curtains. etc.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.
- Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only the cart, stand. tripod. bracket or table specified by the manufacturer or sold with the apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time,
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture. does not operate normally, or has been dropped.
- Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any. should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.
- Power Sources (it applicable): This product should be connected to a power supply only of the type described in these operating instructions. or as marked on the unit.
- Caution: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine. foe, etc.
- (If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Warning (if applicable) Provide an earthing connection before the mains plug is connected to the mains. When disconnecting the earthing connection. be sure to disconnect it after pulling the mains plug out from the mains.
- For Class II apparatus only (if applicable): This symbol means the equipment is a Class II or double insulated electrical appliance_ It has been designed in such a way that it does not require a safety connection to electrical earth.
- Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with ‘Class II Wiring” requires Class II wiring installed by an instructed person or the use of ready-made leads or cords.
- This apparatus is for professional use only. Intended operational climate: moderate.
- (If applicable) When moving or not using the appliance. secure the power cord (e.g.. wrap It with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.
- Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss.
- Warning (if applicable): Please refer to any important information (e.g., electrical, safety. etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
- Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute a risk of electric shock.
- Minimum distances of 10 mm around the apparatus for sufficient ventilation.
Safety Notices
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE ANY COVER. NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
ONLY.
DANGEROUS VOLTAGE: The lightning flash with the arrowhead symbol within the
equilateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage- within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS: The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying this
appliance.
WARNING: To reduce the risk of fire or electrical shock, do not expose this
appliance to rain or moisture. Electrical equipment should NEVER be kept or
stored in damp environments.
NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy. if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception. which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: (a) reorient or relocate the receiving antenna: (b)
move this unit; (c) increase the separation between the equipment and
receiver; (d) connect the equipment into an outlet on a circuit different from
that to which the receiver is connected: (e) be sure that all cables are
properly shielded, using a choke or femte where appropriate; (f) consult the
dealer or an experienced radio-television technician for help. This device
complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Radiation Exposure Statement: This equipment complies with radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator and your body.
If the apparatus contains a coin button-cell battery.
Warning: Do not ingest the battery— chemical bum hazard. The remote
control supplied with this product contains a coin/button-cell battery. If the
coin/button cell battery is swallowed. it can cause severe internal burns in
just 2 hours and can lead to death. Keep new and used batteries away from
children. If the battery compartment does not close securely, stop using the
product and keep it a’.vay from children. If you think batteries might have
been swallowed or placed inside any part of the body, seek immediate medical
attention, Disposal of Batteries (if applicable):
- Never dispose of any types of batteries r fire or near excessive heat or direct aright. Overheated batteries can rupture a explode.
- If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.
- Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries with normal household waste. They do not pose a health or environmental risk during normal use or disposal. (Alkaline batteries are composed primarily of common metals like steel, zinc, and manganese.) Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not completely “dead.” Grouping them together can bring these “live” batteries into contact with one another, creating safety risks, To avoid this, insulate each battery with tape or other non-conductive material to ensure it does not discharge. Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information, refer to your local ordinances or contact your local government.
- Lead-acid batteries: Dispose of lead-acid batteries by twinging them to an electronic waste center or recycling center, or dispose of them in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used in automobiles and should be disposed of in a similar fashion,)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development USED) Canada’s license- exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference. and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Service Instructions
- Disconnect the power cord before servicing.
- Replace critical components only with factory parts or recommended equivalents.
- For AC line powered units: Before returning repaired unit to the user, use an ohmmeter to measure from both AC plug blades to all exposed metal parts. The resistance should be more than 2,000,000 ohms.
Trademarks and Licenses
ION Audio is a trademark of inMusic Brands. Inc., registered in the U.S. and other countries. App Store is a trademark of Apple Inc.. registered in the U.S. and other countries. Android and Google Play are registered trademarks of Google Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG. Inc. and any use of such marks by ION Audio is under license. All other product names. company names trademark. or trade names are those of their respective owners.
Technical Specifications
Output Power: 15 W (peak)
Driver: 5″ (127 mm) Frequency Response: 80 Hz – 15 KHz Bluetooth: Profile:
A2DP, AVRCP Range: Up to 100 ft. (30 m) from source device. (Bluetooth range
is affected by walls. obstructions, and movement. For optimal performance.
place the product it is unobstructed by walls, furniture. etc.) Linked Range:
Up to 32 ft. (10 m) between speakers Specifications are subject to change
without notice.
Water Resistance Class: IPX5 Battery: Built-in rechargeable 3.7V, 2000 mAh
lithium polymer battery Battery Life: Up to 30 hours (Battery life may vary
based on temperature, age, and volume use.) Recharge Time: Up to 5 Hours
Charging Adapter: 5V, 1A Dimensions (WxDxH): 9.8* x 9.8″ x 11.4″ (per speaker)
250 x 250 x 290 mm (per speaker) Weight 4.41 lbs (2 kg) (per speaker)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>