BROAN NuTone 1103233 Module Light Speaker User Manual
- June 6, 2024
- Broan NuTone
Table of Contents
BROAN NuTone 1103233 Module Light Speaker
Installation
Function
The MODULE SPEAKER LED DRIVER: 1.1 Chroma Speaker, 1103233 (120V/60Hz) plays songs through radio frequencies and Bluetooth modules. Turn on the Bluetooth feature on your phone, and you’ll instantly find the Chroma-Comfort Bluetooth device and click to connect. Open the music player software on the phone and play the music through the Bluetooth speaker.
**Function Description
**
Indicator light
Button #1 (for white light)
- Short press (<1.2s) A short press for less than 1.2s will turn the white light on/off.
- Long press (>=1.2s) Basic function: to turn the white light on. Pairing function (within the first 3min after the grille power on): Press Button #1 for more than 1.2s until the white light on, then grille and wall control get paired successfully.
To cancel the pairing, users need to keep pressing Button #1 for more than
10s, until the white light reaches its highest luminance and gets dim
gradually. The white light will flash twice, which means the pairing is
cancelled.
If keep pressing Button #1 for more than 5s then, the white light will get
lighter and reach its highest luminance. The white light will flash twice,
which means the pair again. If the white light is not on after a long press of
over 1.2s and less than 5s, which means grille and wall control are not
paired. Users need to keep pressing for more than 5s until the white light
will get lighter and reach its highest luminance, and then grille and wall
control get paired successfully. If users keep pressing for more than 10s, the
pairing will be cancelled. If the white light is not on after a long press of
over 5s, which means grille and wall control are already paired. If users keep
pressing for more than 10s, the pairing will be cancelled. And if users keep
pressing for more than 5s after that, it will start the pairing again.
Button #5 (for colored light)
- Short press (<1.2s) A short press for less than 1.2s will turn the colored light on/off. In RGB sweep mode, that can turn off the colored light only. If turned on again, it will be switched into RGB static mode.
- Long press (>=1.2s) A long press for over 1.2s will turn on the RGB sweep mode. If it’s already in RGB sweep mode, a long press for over 1.2s will turn it off.
Button #7 (for fan)
- Short press (<1.2s) A short press for less than 1.2s will turn the fan on/off.
- Long press (>=1.2s) A long press for over 1.2s and less than 10s will turn on the fan on/off. A long press for over 10s until the indicator light flash twice, will cancel the BT connection. 10s later, users can reconnect BT.
Button #2 (for decreasing luminance)
- Short press (<1.2s) A short press for less than 1.2s will decrease the luminance level by level, but won’t turn it off.
- Long press (>=1.2s) A short press for more than 1.2s will decrease the luminance gradually, not level by level, but still won’t turn it off.
Button #3 (for increasing luminance)
- Short press (<1.2s) A short press for less than 1.2s will increase the luminance level by level until the highest luminance.
- Long press (>=1.2s) A short press for more than 1.2s will increase the luminance gradually, not level by level, until the highest luminance.
Button #4 (for RGB color inverted change)
- Short press (<1.2s) When not in RGB sweep mode, a short press for less than 1.2s will change RGB color in inverted order level by level. When in RGB sweep mode, a short press for less than 1.2s will stop the RGB sweep mode. At this time, another short press will make it in RGB static mode.
- Long press (>=1.2s) When not in RGB sweep mode, a long press for more than 1.2s will change RGB color in inverted order continuously. When in RGB sweep mode, a long press for more than 1.2s will stop the RGB sweep mode. At this time, another long press will make RGB static change in inverted order continuously.
Button #4 (for RGB color inverted change)
- Short press (<1.2s) When not in RGB sweep mode, a short press for less than 1.2s will change RGB static color in sequence level by level. When in RGB sweep mode, a short press for less than 1.2s will stop the RGB sweep mode. At this time, another short press will make it in RGB static mode.
- Long press (>=1.2s) When not in RGB sweep mode, a long press for more than 1.2s will change RGB color in sequence continuously. When in RGB sweep mode, a long press for more than 1.2s will stop the RGB sweep mode. At this time, another long press will make RGB static change in sequence continuously.
Remark:
All the functions, except for pairing function, work when grille and wall
control paired. Button #2 and Button #3 work only when light on. Button #4 and
Button #6 work only when colored light on. The operations should follow
certain order mentioned above. For function details, please refer to ERD.
Warning
DISCONNECT POWER AT SERVICE ENTRANCE BEFORE CLEANING OR SERVICING. ADD GRILLE
CURRENT TO FAN CURRENT FOR TOTAL CURRENT DRAW. INSTALL ONLY WITH MODELS
INDICATED IN THE INSTALLATION INSTRUCTIONS.
FCC WARNING
Any Changes expressly or modifications not approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co‐located or operating
in conjunction with any other antenna or transmitter. This equipment should be
installed and operated with a minimum distance 20cm between the radiator &
your body.
ISEDC RSS warning
This device complies with Innovation, Science and Economic Development Canada Compliance licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>