Dongguan Ruifengzhi Intelligent Products TM-206 Selfie Stick PTZ Mobile Phone Holder Recognition Instruction Manual
- June 5, 2024
- Dongguan Ruifengzhi Intelligent Products
Table of Contents
Selfie Stick PTZ
Instruction Manual
TM-206
Please read the instruction manual carefully before use
Product introduction
-
Cell Phone Clip
-
Shooting Light
-
Battery cover
-
Quarter-inch universal interface
-
Long press ON/OFF
short press ON/OFF
360 degree automatic rotation -
Power on indicator
Bluetooth indicator
Main function introduction
- Control smart phone video recording
- Face tracking
Battery installation
3 AA batteries model
battery cover
- Lock
- Opening rotation direction
As shown in the figure, when you open the battery cover, turn the lock on the battery cover at the bottom of the product Break to the unlocking direction, and then turn the battery cover in the direction indicated to open it battery cover; then press the positive and negative poles to install 3 AA batteries;
Lithium battery model
Product back
- Charging port
Built-in 1800mAh lithium battery
Vertical and horizontal switching
Loosen the knob, loosen the phone clip and rotate to horizontal/vertical mode, install the phone after tightening the knob
APP download
Live 360 APP
| Apai Genie
---|---
Live follow|
Take pictures/ video follow
iPhone/Android
| iPhone| Android
•
•
•
•
•
•| •
•
•
•
•
•|
•
•
•
•
•
•
Please search and download in Tencent app treasure
| Please search and download in Tencent app treasure
•
•
•| •
•
•|
•
•
•
ios/Android
| 
ios
| 
Android
User instructions
Install battery
Unscrew the battery cover and insert 3x “AA” batteries according to the direction marked on the battery case. Put back the battery cover.
Install phone
Break apart the phone clip, slide the phone into the direction of the front of the phone lens Mobile phone clip, just adjust the mobile phone to the right
Horizontal and vertical screen switching
Loosen the knob, loosen the phone clip and rotate to horizontal/Vertical mode, install the phone after tightening the knob
Power on for use
Long Press Start (start/stop 360 degree automatic rotation function) , red light flashing; Long Press Turn Off, red light out
Connected devices
(1) The AI Live PTZ turns on, the LED light flashes, the AI Live PTZ Is
waiting for Bluetooth connection State
(2) Turn on Bluetooth and location information (GPS, location), turn on live
360APP, no manual bluetooth matching, wait 3-6 seconds, AI Live PTZ and APP
automatically connected
(3) When the red light of the AI Live PTZ is on, the Bluetooth icon on the APP
interface turns blue, and the AI Live PTZ is automatically connected to the
APP Successful connection
(4) Live 360APP and device connection, Apai Genie APP can be automatically
connected.
APP USAGE
(1) The use of live 360APP (live/photo function): Open live 360APP, select
live platform (Douyin short video/kuaishou/TikTok /Taobao host) or
camera/wechat after such mobile phone custom applications, automatically
adjust to the platform, automatically enable face follow mode.
(2) The use of the Apai Genie APP (photo and video function): first connect to
the live 360 APP and device, open the live 360 APP, slide down to the custom
APP, open the Apai Genie APP in the custom APP, click on the lock symbol on
the screen to unlock it, to automatically enable face-following mode.
Special Note
(1) When the AI Live PTZ is connected to the mobile phone, there is no need to
manually search for the Bluetooth name, and no need to manually pair Bluetooth
(2) Some mobile phone models may have Bluetooth connection delay, please wait
patiently for Bluetooth Automatic connection is successful, or restart the
selfie stick and APP, continue to try to connect automatically
(3) When using the phone’s built-in camera to take pictures, you need to turn
on voice control in the camera settings or smile face capture
Product Parameters
Product Name: Selfie Stick PTZ
Model: TM-206
Support cell phone size: 56-100mm
Power Supply: 3 AA batteries
Working voltage: Lithium battery 3.7V/dry battery 4.5V
Charging voltage: 5V/1A (lithium battery model)
Product Weight: 220g
Product Size: 16777.677.6mm
Mechanical Angle:
360° infinite horizontal rotation
37° vertical flip up
37° Flip down vertically
Quality Inspection: Qualified Products
Support System: ios 10.0 and higher
Android 8.1 and higher
Implementation Standard: GB4943
Warranty Card
Product Model|
Purchase Date
|
Customer Name
|
Tel
|
Address
|
Problem Description
|
Dealer Information (Signing)
Made in China
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>