nordlux 2118181001 Kinver 26 Outdoor LED Wall Light Instruction Manual
- June 3, 2024
- nordlux
Table of Contents
2118181001 Kinver 26 Outdoor LED Wall Light
KINVER
Mounting instruction
- IP5X: Dust is prevented from entering the lamp in amounts that can cause damage to the function/safety of the lamp.
- IPX4: Raindrops falling from any angle will not affect the function/safety of the lamp.
- The lamp is only suitable for connecting directly to the mains.
- Do not exceed the maximum wattage.
The mounting instruction must not be discarded.
IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
**** Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances that may cause damage to human health and the environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for the recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products from straining nature and the environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service, or the store where you purchased this product.
Parallel arranging possible.
Class I: The lamp has an earth terminal and must be connected to the yellow/green earth wire.
In Denmark, outdoor lightings must be mounted by an authorized electrician.
We congratulate you on your new outdoor lamp!
Guarantee
The Nordlux Outdoor lamps in copper, brass, tombac, and galvanized are
guaranteed for up to 15 years. This guarantee applies to extensive corrosion
in the form of holes in the metal caused by rust. The guarantee is subject to
the presentation of a receipt.
There is not guarantee on the components which have been damaged by wear
and tear or mistreatment of the lamps
We congratulate you on your new outdoor lamp
Stainless steel
Remember to take care of your lamp. Just follow the guidelines below.
The shiny, uniform, and the decorative surface of stainless steel make it very
suitable for outdoor use.
It is an alloy consisting of iron, chrome, and nickel. During bath pickling, a
thin, rustproof oxide layer forms on the surface. The surface is continually
vulnerable to atmospheric conditions, and other effects of the close
environment. This means that the lamp must be regularly maintained if its
surface is to remain shiny and untarnished by rust. Before setting it up,
treat your lamp with acid-free oil, and dry it off with a soft cloth. Repeat
this three or four times a year. Stainless steel lamps are not recommended for
use in aggressive environments such as coastal, agricultural, or industrial
areas.
Copper, Brass, and Tombac fixtures
Our copper, brass, and tombac fixtures are made from respectively solid
copper, brass, and tombac. The mechanical machining will leave small scratches
on the surface, as well as residues of rinse aid. This rapidly disappears in
the patina process. After the first rain showers, the copper/brass/tombak
surface will appear stained, but the aerated air and
moisture will soon make the lamp appear with a dark brownish color. Over the
years, the material copper will get a beautiful patina-green color and
brass/tombac will get a darker and more uniform color. The uniformity of the
patina surface, as well as the rate at which the process occurs, is dependent
on the environment that affects the fixture.
Hot-galvanized lamps
The zinc treatment of the steel lamps is executed manually in plants. The
temperature of the melted zinc is about 460 degrees. When the lamps are dipped
in melted zinc a reaction between the metals occurs, which develops alloys on
the surface. The lamp and the components of the lamp are manually dipped in
the form of eating ni Anita eat ni snoitairav level tnemtaert site .cniz to
partly an uneven surface and partly minor formations of drops. Thin »zinc
curtains« might also occur on the surface and they show as easily be removed
or brushed off with a soft brush. a thin film that hangs down from the edge of
the lamp. This film can
Condensation
Condensation is a natural phenomenon arising under specific atmospheric
conditions. Damp heat and cold air meet, which causes condensation of water on
the surface. When water heats up it leads to rising water vapor, which will be
able to affect electric components. Condensation is not included by Nordlux
warranty unless it is possible to prove that a technical /production error in
the lighting causes entry of water. In case of condensation please check:
- If the lighting is mounted according to instructions. Washers should seal tightly. Make sure to tension screws and lenses.
- In garden lighting rising damp from the ground may cause condensation- material into the metal post. lion in the metal post. This problem can be defeated by filling sealing
- It is highly important that drainage holes are kept free of impurities if any.
BEFORE ASSEMBLING THE BOLLARD AGAIN DO REMEMBER TO WIPE OFF ALL PARTS!
Nordlux A/S · 0stre Havnegade 34· DK- 9000 Aalborg
Documents / Resources
|
nordlux 2118181001 Kinver 26 Outdoor LED Wall
Light
[pdf] Instruction Manual
2118181001 Kinver 26 Outdoor LED Wall Light, 2118181001, Kinver 26 Outdoor LED
Wall Light, LED Wall Light, Wall Light, Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>