Yealink VoIP Phones User Guide
- June 5, 2024
- Yealink
Table of Contents
Yealink VoIP Phones
Browse to Phones Web UI
- Phones web UI: to access the phones web UI press the OK button (on right of the keypad) to retrieve the phones IP address.
- Enter the IP address in your browser (eg 192.168.1.xx).
- UserName and Password: Admin- admin, Password- admin.
- Click Confirm.
Account Tab
- Select Account tab. (or another unused account if Account 1 is in use).
- Account Active: On
- Label: Name Your Name
- Display Name: Displays on your telephone phone screen when idle.
- Register Name: Full DID eg 092420000
- User Name: Full DID eg 092420000
- Password: is the password associated with the phone number.
- SIP Server: phone.hero.co.nz
- Port: 5060
- Transport: TLS.
- Voice Mail: *55
- NAT Traversal: Disabled
- Confirm: to Save
Phone Tab
- Select Phone Tab
- Select Country: New Zealand
- Set Time Zone: +12 NZ Primary NTP >> nz.pool.ntp.org (CONFIRM)
- DSS Keys: Phone Tab | DSS Key >> use this to assign a variety of standard functions to the T28 10 function keys on the right side of the phone.
- At bottom: Select Confirm
Date and Time Settings
- Time Zone: eg +0 New Zealand | Location (New Zealand(Wellington)
- Daylight Saving: Automatic
- Primary Server: nz.pool.ntp.org
Device Provisioning
Address Books
You can add and manage addresses either via the DSS tab or alternately by
importing a variety of format types using the Directory function.
- DSS: Using the DSS you can depending on model type configure up to 27 Speed Dials
- Directory : The Directory enables you to add via the Web UI directly, import your own XML or CSV lists or finally connect to your LDAP directory source.
Bluetooth headsets – T48G
The T48G can be purchased with an optional USB Bluetooth Dongle.
- Insert the USB dongle with “TOP” facing upwards into the USB port of the back of the phone
- Turn on the Bluetooth headset
- Long press the pairing button on your bluetooth headset
- Activate the Bluetooth feature on the phone.
- Select Scan on the phone
- If required enter the PIN 0000 or 1234 to connect the phone and headset
Troubleshooting
If the phone icon by your DisplayName is not solid, review User account, password and SIP server settings instructions above. Ensure SIP ALG is disabled on your router. Ensure STUN is Off or any NAT traversal settings
Busy Lamp Field (BLF)
If required you can see our BLF User Guide.
Yealink – Diagnostics/Troubleshooting
To assist us troubleshoot configuration issues with Yealink phones we require
Syslog, SIP trace and configuration data from your Yealink handset.
Settings Tab
- Select Settings tab >> Configuration
- Export System Log: Set the Syslog level to 6 -> reboot the phone
- Pcap Feature: Start to capture the Trace -> reproduce your issue -> stop capturing the Trace -> Export PCAP Trace
- Export or Import Configuration: Export config.bin
- Email Download files to our support site.
Unique solution ID: #1076 Author: Support Last update: 2016-05-29 08:25
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>