Shenzhen U Angel Technology US100BW Wireless Power Bank User Manual
- June 5, 2024
- Shenzhen U Angel Technology
Table of Contents
Shenzhen U Angel Technology US100BW Wireless Power Bank User Manual
Introduction
The product with PD,QC3.0 and wireless function, it’s our company’s private model, with appearance patent, built-in high capacity battery. It uses intelligent MCU control to achieve fast charging of mobile phones by adjusting different output voltages and currents. Support wireless charging at the same time.
Product information
| Input | Type -C:5V/3A 9V/2A |
|---|---|
| Output | Wireless charging: 10W / 7.5W /5W USB:5V/3A, 9V/2.22A, 12V/1.5A |
Type-C:5V/3A, 9V/2.22A,12V/1.5A
Material| ABS+PC
Battery| Polymer lithium battery
Capacity| 10000mAh
Net weight| 220g
Size| 14368.717.4mm
Use temperature| 0-45°C
Transport & Storage temperatures| -20~50°C
Product Sketches
Methods of use
-
Wireless charging Part
After pressing the button to turn on the power bank, when the wireless charging function stand by, the red LED flashes, and put your mobile phone to wireless charging area, when the blue LED indicator lights up, it means wireless charging function working. When green and blue LED lights up together, it means wireless fast charging function working. The product wireless charging function can only be used when connected to external power supply.
-
Wired charging
Connect one end of the USB line (USB-Micro/USB-Type C/Type C-Type C cable with the fast charge function) with the output interface of this product, the other end connected to the mobile phone or other equipment, press the button, that is to start charging. The Green LED light up means the fast charging function start.
DC input for this product
The data line Type-C USB end up the input interface, the other end is connected with the QC 3.0 or PD type adapter to charge the product, the Green LED light up means the fast charge function start.
FCC STATEMENTS
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>