Shenzhen U Angel Technology U50CW Magnetic Wireless Power Bank User Manual

Shenzhen U Angel Technology U50CW Magnetic Wireless Power Bank User Manual

At a Glance

Charge Tour Phone or Tablet Using Charging Cables

Charging the iPhone 12 Series and Other Devices Wirelessly

• Charging the iPhone 12 Series

1. If you need to start the wireless charging function, short press the button and the red and blue lights flash twice, then the red light will stay on, and it will go out automatically for 16-32 seconds without load.
2. Place your iPhone 12 on the charger as illustrated below and it will be held in place magnetically. The wireless charging indicator will flash blue, indicating it is charging your phone

Charge Other Devices

for other phones that support wireless charging, align your phone with the charging logo on the charger. If no charging icon shows on your device, try adjusting the position of the phone. (Note: The wireless charging function is designed for iPhone 12 series, and this function can not be used for other mobile phone models)

Note:

• You cannot charge your device wirelessly in these scenarios:
• When using a case with a pop socket
• When using an ultra-thick(>5mm) protective phone case
• Do not use adapter with an output of 5V / 1A (5W) or less
• Wireless chargers make charging more convenient than wired
• chargers, but confined by current wireless technology, their
• charging speed is slower than that of wired chargers
• High temperatures will reduce charging speed and restrict
• power, which is something that happens to all wireless
• chargers. It is recommended that you charge your device in
• environments with temperatures below 25/77°F
• Both the protective phone case and the position of your device
• on the wireless charger will affect the charging speed.
• The farther it is placed from the center of the wireless charger,
• the slower the charging speed will be.

Charging Devices Wirelessly and Recharging Your Portable Charge

Simultaneously

You can charge Power Core at the same time while the device is wirelessly charging. The wireless charging indicator will be steady blue, and the battery indicator will show the current battery level. One light flashes, and the other lights display power normally.

Recharging Your Portable Charge

While recharging your Power Core, the battery level indicator will show the current battery level and the wireless charging indicator will turn off.

Note: When your Power Core exceeds the temperature limit, the battery level indicator will turn off. Let Power Core cool down before use.

IMPORTANT SAFETY INSTRUCTIONS

1. Store the product in a cool and dry place.
2. Do not store the product in a hot or boomed environment.
3. Use of power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to person.
4. Operating temperature should be between 0 to 40/14°F to 104°F
5. Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
6. If the product is not used for long periods of time. you should charge and discharge once every three months.
7. When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
8. In normal conditions, the battery performance will decline over several years.
9. Do not dispose of the product in heat or fire
10. Do not clean the product with harmful chemicals or detergents
11. Misuse, dropping, or excessive force may cause product damage
12. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
13. Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.

Customer Service

FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>