PHILIPS SCF551 Avent Classic Soft Spout Cup User Manual

: June 3, 2024
: Philips

Table of Contents

**
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**

PHILIPS SCF551 Avent Classic Soft Spout Cup

Fitting

PHILIPS SCF551 Avent Classic Soft Spout Cup 01

Important
Read this user manual carefully before you use the spout cup and save it for future reference. Always assemble and disassemble the spout cup as shown in the figure in this user manual.

For your child‘s safety and health

Warning

Check the spout cup before each use. If any damage or crack is detected, stop using the spout cup immediately.
Always use this product with adult supervision.
Continuous and prolonged sipping of fluids will cause tooth decay.
Do not heat up any liquid or food in the microwave.
Always check food temperature before feeding.
Do not allow child to play with small parts or walk/run while using bottles or cups.
Keep all components not in use out of the reach of children.

Caution

Before first use, disassemble all parts and clean and sterilize them thoroughly. Place the spout cup in boiling water for 5 minutes. This is to ensure hygiene.
The spout cup is also suitable for electric and microwave sterilization. Only use a microwave sterilizer or Philips Avent microwave sterilizing bags (SFC297) to sterilize any part of the spout cup in the microwave.
Make sure all parts are properly assembled before you give the spout cup to your child.
This spout cup is intended for use with diluted drinks. Water and milk are the best drinks for children of any age.
Thick, fizzy or pulpy drinks may block the valve and cause it to break or leak.
This spout cup is not designed for preparing infant formula. Do not use the spout cup to mix and shake infant formula as this can clog the holes and cause the spout cup to leak.
Do not overtighten the drinking top on the spout cup.
Do not use the spout as a soother.
Do not use the spout and handles with a glass bottle.
Do not put the spout cup in the freezer compartment.
To prevent scalding, let hot liquid cool down before you fill the spout cup.

Cleaning and sterilization

After each use, disassemble all parts and clean them thoroughly in warm water and some washing-up liquid. You can also clean all parts on the top rack of the dishwasher.
Do not use abrasive or anti- bacterial cleaning agents or chemical solvents.
Do not place parts directly on surfaces that have been cleaned with anti-bacterial cleaners.
Food colourings can discolour parts. – After cleaning, sterilize the spout cup. – The spout cup is suitable for all methods of sterilization.

Storage

For hygiene and maintenance, disassemble the spout cup and store it in a dry and covered container.
Keep the spout cup away from heat sources and direct sunlight.

Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer. You can also contact the Philips Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details)