Evakool Slide-EKFS-SML Heavy Duty Fridge Instruction Manual
- June 5, 2024
- Evakool
Table of Contents
Evakool Slide-EKFS-SML Heavy Duty Fridge
PARTS LIST
- Small Slide: 773X511X69mm
- Large Slide: 953X598X69mm
- Slide Out: 75cm
- Mounting Kit:
- 6x M6 Washers
- 6x M6 Tee Nuts
- 4x M6x 20mm Bolts
INSTALLATION GUIDE
- Open the slide by depressing the lock lever on the right, then pull slide forward to reveal the fixing holes in the side rails.
- Drill six 7mm holes for the Tee Nutes to be fitted into.
- Insert the Tee Nuts into the holes ensuring the nuts are upright and square to the hole and knock them in.
- Mark the six drilling points through the slide fixing holes with a permanent marker.
- Insert the 6 x M6 Tee Nuts supplied into the six holes.
- Position the fridge slide on the timber top where required. Using 4 x M6 bolts to fix on.
IMPORTANT NOTES
- It is suggested to fit the fridge slide to a minimum 12mm thick timber top.
- To tie down the fridge on the slide, use the 4pce nylon strap, tie-down kit supplied.
- The slide must be securely and evenly bolted down to the floor of the vehicle or to wherever the slide is to used.
- Under no circumstances can the slide be used other than when it is fixed down correctly on a smooth even surface with no contortion of the frame.
- The sliding tray is activated by depressing the right-hand side lever on the front to pull forward and lock in; heavily pushing the lever without depressing it will damage the liver.
- Ensure that the tray firmly locks into place when returning the tray to its inward position.
- The slide is designed to carry fridges stocked up to 80kg in total. NOT recommended for commercial use and no warranty applies if used so.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>