RETRO FIGHTERS N64 Wireless Gamepad User Guide
- June 5, 2024
- RETRO FIGHTERS
Table of Contents
RETRO FIGHTERS N64 Wireless Gamepad
SOCIAL MEDIA
Be sure to follow us for the latest news and product releases!
OVERVIEW
- Insert the dong le into the controller port you want to use
- The dongla light will flash iooicating it is in pairing roode
- If it is your fl rst time pa iring, hold the •start• button for 3 seconds to go into pairing mode and 1hen let go
- The controller wtll now pair to the dong le
- Both 1he light on dongle and the light on the controller wtll be solid to indicate a connection
Please note for future use, you do not need to pair to the dongle,you can just
press the “Start” button and the controller will automatically connect the
controller
with the previous dongle ueed.
“If you’d llk’e to pair to 8 different dongle, pleme do the following steps:
- Make sure that the controller light is no longer flashing and is off
- Remove 1he previous dongle end lnaert the new dongle you’d Ilka to pair
- The light on the dongle should be flashing indicating it is in pairing mode make sure that any other controllern are not connected to this dongle and are off)
- Hold the “start” button for 3 seconds to go Into pairing mode and then let go
- The controller will now pair to Iha naw dongle
If you failed to connect or need to reset the controller, please use a paper clip or small pin to press the reset button located on back of the controller
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
followin measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment