RETRO FIGHTERS Battler Wireless Gamepad Instruction Manual

RETRO FIGHTERS Battler Wireless Gamepad

OVERVIEW

1. Analog Stick (Left)
2. D-Pad
3. Analog Stick (Right)
4. LED Indicator
5. B Button
6. A Button
7. Y Button
8. X Button
9. Turbo
10. Screen Shot (Switch only)
11. Button (Switch only)
12. “4”Button (Switch only)
13. L1 Shoulder Button
14. R1 Shoulder Button
15. L2 Trigger (Back)
16. R2 Trigger (Back)
17. Pairing Button
18. Home (Switch)
19. Start (GameCube)

Setup (Switch)

Make sure that you turn on “Pro Wired Communication” in your Switch System settings otherwise your gamepad will not connect. Connect using the top pairing button.

How to pair

1. Insert the dongle into the controller port you want to use.
2. Press the “Home” button and 4 LEDs flash.
3. Press the back pairing button to automatically pair the controller.

powering off
Press L3+ “-” to turn off your gamepad.

Xinput to Dinput mode
Press “Home” button for approximately 3-5 seconds to swap Dinput.

Turbo

Press the button you would like to activate turbo and press T turbo button at the same time. To deactivate, Hold the button you set and press “T” button at the same time.

LED indicators

• Player 4
• Player 3
• Player 2/Dinput Mode
• Player 1

Customer service

We strive to make our fellow gamers happy. If you experience any issues with this product please contact us directly. We are here to help and we will make it right! You can send us an email at: support@retrofighters.com.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The devices have been evaluated to meet general RF exposure requirements, the device can be used in portable exposure conditions without restriction.

Social media
Be sure to follow us for the latest news and product releases.

• retrofighters
• retrofightersco
• retro.fighters
• retrofighters

Tag #retrofighters for a chance to be featured on our social medial

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>