WSHDZ Bluetooth Earbuds User Manual

: June 7, 2024
: WSHDZ

Table of Contents

Specification of Earbuds
How to operate the earbuds:
How to pairing
Warming remain
How to operate：
Care and maintenance
Safety guidance:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WSHDZ Bluetooth Earbuds User Manual

Specification of Earbuds

Product Name: T7
Bluetooth Version: Version 5.0
Protocol: Supports HFP 1.7, HSP 1.2, AVRCP 1.6, SPP 1.2 and PBAP 1.0
Chipset: BT8832A
Working distance: 10M
Call Time: 5-6H (1 time full charged)
Play Music Time: 5-6H (1 time full charged)
Standby time:650H (With charger case)
Frequency:2402MHz~2480MHz
Battery type: 3.7V, >50mA Li Battery
Charging Time: 1-2H
Working Temperature: -10°-55°

Specification of charger case:

Input current: 5V 1A
Output current: 5V 1A
Battery type: 3.7V
Charging time:1-2H

Sketch

Fitting
The ear cap heads down Adjust to the best fit

L for Left
R for Right

How to operate the earbuds:

Make sure that the charging case has electricity. If the charging compartment is out of power, please fully charge the charging compartment;(Pick up the two earbuds and put them back on the cover. The charging compartment indicator lights up to indicate that there is power. If it does not light, it means
no power.)
Take the two earbuds out of the charging case and wear them on the left and right ears respectively. The earphones will automatically turn on and automatically pair;(Voice prompt: power on, left channel, right channel, waiting for connection)
Turn on the phone Bluetooth and click on the connection pair
name ” T7″ to connect (voice prompt “Connected”).

How to pairing

Enter into the Settings
Select Bluetooth in your device
Turn on Bluetooth in your device settings Select ” T7 ” in your device’s Bluetooth settings to connect
Bluetooth Paired

Warming remain

For the first time to use the earbuds or for a long time to no use, please charge the charging case and earphones before, Please keep it in an unobstructed and effective environment within 10 meters. Otherwise, it may be stuck and disconnected.

Indicator description:

Charge the earbuds: Put the earbuds into the charging case and cover it to charge.
earbuds indicator: Lights up red when charging, and red light when fully charged. The charging case flashes green and the light is off after charging.
Charge the charging case: Plug the 5V/1A USB into the charging port to charge. During charging, the middle digit of the charging stand display indicates the charging case power. When the number is displayed as “100”, the battery is fully charged.
Charging case indicator light: The charging flashes green light, and the light is off after charging.
Charge to the mobile phone： Connect USB cable to USB port of
case to charge the mobile phone.
Charging case indicator light : Light will turn green when charging and turn off when fully charged

How to operate：

Turn on: Press and hold the touch multi-function button for 3 seconds or take it out from the charging case, the earbuds will be turned on automatically
Turn off: Press and hold the touch multi-function button for 5 seconds (Led light turn red and stay) to shut down, or directly put the earbuds back into the charging case, the earbuds automatically turns red and automatically turns off.
Answer and hang up: When phone coming, short press the touch button one time, answer the phone, short press the touch button one time when call end
Reject the phone： Press the touch button for 3s,reject the phone
Start Siri: Long press Right earbud or Left earbud for 1s you will hear “DU”, release and phone voice control is started. Siri supported only
NEXT/PREV Songs: Double click on the Right earbud(R), it plays next song, double click on the L earbud, it plays previous song.

Track Forward
Track Backward

Volume +/- : Continuous press right earbud 3 times to turn up the volume; continuous press left earbud 3 times to turn down the volume, or you can adjust the volume on the phone directly.

Volume +
Volume –

Single Earbud Mode：
When the main earbud (R) and the secondary earbud (L) are not connected, taking out one of any of the earbuds separately from the charging case. The earbud prompts “turn on”, then for 3 seconds, the blue light flashes—the red and blue lights flash alternately, open the mobile phone Bluetooth function, search for the Bluetooth device and click connect, the “Bluetooth Connected ” will be displayed in the upper right corner of the phone screen, and the earbud will prompt “Connected”, or the manual operation of a single earbud will repeat the above operation.

Remark: Single use
Main earbuds(R) Bluetooth name: T7
secondary earbud (L) Bluetooth name: T7 L

Repeated use: the earbuds has been connected with the mobile phone— open the phone Bluetooth, and take out the two earbuds from the charging case, without any operation, it will connect with the phone automatically . If you use a different phone, you need to follow the steps in the instructions for use

Special Note: The two earbuds are well paired before packaged, but if they can not paired well due to some wrong operations, please do as following steps to re-pair the earbuds. Power off the two earbuds, then press the button of the two earbuds at same time and do not release for about 10s, blue lights sparkled —-> red and blue lights sparkled alternatively —> release —>two earbuds are in the situation of paired, and they are ready for phone searching.

Note: This operation also clears the team record between the phone and the earbuds, so you need to delete the Bluetooth pairing record before the phone and then search for the connection again.

Care and maintenance

To avoid any mis-operation caused by collision put the earbud in charging case before put in your pocket
Do not use a abrasive cleaner to clean the Bluetooth earbuds.
Do not expose the Bluetooth earbuds to excessive temperature.
Do not expose the earbud under the blazing sun for a long time.
Do not let the Bluetooth earbuds be close to the fire source.
Do not drop, bump, scratch, twist, tap, crush.
Keep away from magnets, appliances and speakers when using Bluetooth earbuds.
Do not place the Bluetooth earbuds in extreme temperature (Normal operating temperature range -10°C-55°C)
Do not expose the Bluetooth earbuds to moisture.
If you do not use the Bluetooth earbuds for a long time, please charge it fully and charge it once a week to extend the life of the Bluetooth earbuds.

Safety guidance:

please use the standard 5V charger (4.9-5.5V)
Do not place the charging case and the Bluetooth earbuds next to the flammable explosives.
Do not disassemble the charging case and Bluetooth earbuds, or insert other items into the product to avoid damage to the product or even cause harm to you.

Serious warning:

Do not use this product while charging. Please use the adapter specified by the manufacturer to charge the product.
Do not disassemble the built-in lithium battery.
Do not let the metal contact or short the electrode.
Do not touch or squeeze the battery to avoid Place in a humid or hot (>60 ° C) environment.

Packing details:

Item Name

|

Quantity

---|---

Bluetooth ear buds

|

2 pcs

Charger case

|

1 pcs

User manual