xiaomi Temperature and Humidity Monitor Clock User Manual

: June 11, 2024
: Xiaomi

Table of Contents

xiaomi Temperature and Humidity Monitor Clock
Product Overview
Installation
How to Use
Smart Connection
Cleaning & Maintenance
Troubleshooting
Speciﬁcations
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

xiaomi Temperature and Humidity Monitor Clock

Temperature and Humidity Monitor Clock User Manual
Read this manual carefully before use, and retain it for future reference

Product Overview

$xiaomi-Temperature-and-Humidity-Monitor-Clock-FIG- $1$$

Accessory List

Installation

Installing the Batteries

Remove the cover from the cover opening on the back of the clock, separately) with the negative (—) side facing downwards, and then reinstall the cover.
Note : Connect the clock with the Mi Home/Xiaomi Home app when using it for the ﬁrst time. Once connected successfully, the clock will automatically calibrate time.

Installing the clock
Once the clock is working normally, it can be installed indoors in the following ways: $xiaomi-Temperature-and-Humidity-Monitor-Clock-FIG- $4$$

Using the stand: Remove the release liner from the stand, align the guide marks and press ﬁrmly to stick the stand on the back of the clock. Place the clock on a desk, TV cabinet or other ﬂat surface.
Using the adhesive sticker: Remove the release liner from one side of the adhesive sticker to stick it on the back of the clock. Then remove the release liner from the other side of the adhesive sticker to stick the clock on a wall.
Using the flexible magnet: Remove the release liner from the flexible magnet to stick it on the back of the clock. Then attach the clock to a surface that the magnet can stick to such as refrigerator. $xiaomi-Temperature-and-Humidity-Monitor-Clock-FIG- $5$$

How to Use

Display $xiaomi-Temperature-and-Humidity-Monitor-Clock-FIG- $6$$

Refresh Notiﬁcation

To improve the display’s visual effect and eliminate after-images, it will blink (colors are inverted once every 30 minutes so as to refresh the display.

Comfort Level Description $xiaomi-Temperature-and-Humidity-Monitor-Clock- FIG- $7$$

Low Battery Notification

Please replace the batteries when this symbol appears at the top right corner of the display.

Smart Connection

Connecting with Mi Home/Xiaomi Home App

This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search “Mi Home/Xiaomi Home” in the app store to download and install it. Open Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow prompts to add your device.

The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.

Connecting with Other Devices

Once successfully connecting the clock with the app, go to the plugin of Xiaomi Temperature and Humidity Monitor Clock in the app, and select “Smart scenes”. Follow the instructions in the app to complete the smart connection with other devices.

Notes:

To achieve smart connection, the clock needs to work with devices featuring Bluetooth gateway function. The gateway and relevant connection devices need to be purchased separately. Please contact the oﬃcial customer service for more information.
The version of the app might have been updated, please follow the instructions based on the current app version.

Restoring Factory Settings

Remove the cover on the back of the clock, and connect the “Reset” and the “Gnd” metal points near any battery with a metal conductive material for more than 7 seconds when the clock is working. After the clock restarts, the factory settings are restored. $xiaomi-Temperature-and-Humidity-Monitor-Clock- FIG- $10$$

Cleaning & Maintenance

Please prevent water from getting into the clock when cleaning it. When the surface of the clock is dirty, it can be wiped clean using a damp soft cloth with some neutral detergent.

Precautions

Do not submerge the ventilation holes into water.
Do not remove the clock from a wall with force if it is attached with the adhesive sticker, so as to avoid damage to the wall or the clock.
This clock is not suitable for use in environments with temperatures below 0°C.
Please keep it away from harsh environments with high temperatures or high humidity.
This clock is designed to facilitate a healthy lifestyle, but should not be used as a measuring tool.

Troubleshooting

Issue	Possible Cause	Solution

The display stops refreshing.

| .| .

negative and positive sides

|

.

Time is inaccurate.

|

No calibration for an extended period of time

| Calibrate the time via Mi Home/Xiaomi Home app.

Temperature and humidity are inaccurate.

| Ventilation holes are blocked.| Clear any blockage.

Water gets into the ventilation holes.

| Place in a well-ventilated location or use a tissue paper to thoroughly dry out.

Speciﬁcations

Name: Xiaomi Temperature and Humidity Monitor Clock Model: LYWSD02MMC
Materials: ABS + PC
Item Dimensions: 110 × 55 × 10.1 mm
Net Weight: 57 g
Rated Voltage: 3 V
Wireless Connectivity: Bluetooth®˜ 5.0 (Bluetooth Low Energy)
Operation Frequency: 2402-2480 MHz
Maximum Output Power: 4 dBm
Time Resolution: 1 min
Temperature Range: 0°C to 60°C
Temperature Resolution: 0.1°C
Humidity Range: 0–99% RH
Humidity Resolution: 1% RH

Note：

The 8th to the 10th digits in the SN code on the product and the package represent the factory code.

Note:

Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. All product names, trademarks and registered trademarks are property of their respective owners.

Hereby, Miaomiaoce Technology (Beijing) Co., Ltd. declares that the radio equipment type LYWSD02MMC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

DISPOSAL

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Miaomiaoce Technology (Beĳing) Co., Ltd. (a Mi Ecosystem company) Address: No. 1-Y1-06, 1F, Tower A, Innovation Building, No. 11 HEPINGLI East Street, Dongcheng District, Beijing, China
For further information, please go to www.mi.com

Importer:

Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz