AIPER MT600 Robotic Vacuum Cleaner Instruction Manual
- June 5, 2024
- AIPER
Table of Contents
AIPER MT600 Robotic Vacuum Cleaner
WiFi Manual
-
Scan the bar code below to download Tuya WIFI APP–“smart life”.
-
Open APP “smart life”, registered your account by phone number or email etc.
-
Enter “Add device” surface.
-
Enter “Add Manually”, click one of icon to add, any icon is OK.
-
Use your thumb to press and hold the power button, while the index finger presses against the anti-collision strip of the machine. When you hear the voice of “Di”, move away your hand, then you can see the blue light on the panel is blinking
-
Select the available network, only support 2.4GHz, enter the correct WIFI password, click to confirm.
-
After confirmed, the “Connecting” progress of the robot will be displayed.
-
After the connection is successful, it will appear “Device added successfully”.
-
You can enter the operation interface to control the robot now.
-
To connect to “Alexa: or “Google Home”, please get back to exit the robot operation interface, then click “Me” to see more services
-
Click “More Services”, it will show “Voice Services”, including” Alexa” and “Google Assistant”.
FCC Instructions
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no a that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiveris connected.
- Consult the dealer or an experienced radio/TV technicianfor help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
product.
FCC Radiation Exposure Statement:
Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>