buzztv XR4500 TV Box User Manual
- June 9, 2024
- buzztv
Table of Contents
XR4500 TV Box
User Manual
XR4500 XRS4500 XRS4500MAX
Package Contents
Connection
AV Connection
a. Connect the AV cable of the 3 color (red/ white/yellow) to the
XRS4500/XR4500’s AV output interface, and the other end to the TV’s AV input
interface. Connection can be made by colour.
b. Power on the XRS4500/XR4500. Set the TV video mode to AV input.
HDTV Connection
a. Connect HDMI cable to the XRS4500/XR4500’s output interface, and the other
end to the TV’s HDMI input interface.
b. Power on the XRS4500/XR4500. Set the TV video mode to HDTV input.
Installation Steps
- Connect XRS4500/XR4500 TV Box to the power supply.
- Connect XRS4500/XR4500 to your TV with an HDMI Cable or AV Cable.
- For a wired connection, plug-in an Ethernet cable from the TV Box to your modem or router. For wireless, choose your Wi-Fi network and input your Wi-Fi password.
- LED Light: Blue ON Red OFF
Troubleshooting
Warning: Under no circumstances should you try to repair the unit by yourself, as this will invalidate the warranty. Do not open it as there is a risk electrical shock. If any fault occurs, please first check with this troubleshooting checklist. If you are unable to remedy a problem by following this guide, contact your dealer for help.
| Problem | Solution |
|---|---|
| No Power | •Check if the power adapter is property connected to the power and |
the TV box
•Press the power on the remote controller to turn on the power
No Picture| •Re-Connect the HDTV cable or AV cable
•Check if the TV is powered on
No sound or distored sound| •Adjust the volume
•Check that the speakers are connected correctly
The TV box does not respond to the remote control| •Aim the remote control
directly at the sensor on thefront of the TV box
•Reduce the distance to the N box
•Replace batteries in the remote control
•Possibility of system crash, disconnect and reconnect the power supply
No sound during playback| •The audio codec may not be supported by the N box
•Check the volume
The contents of the USB or flash drive cannot be read| •The USB or flash drive
format is not computable with the box
•If one of the USB can not be read, please turn off the TV box for 30 seconds
and restart the TV box
Slow operation of the USB flash drive| •Large file size or high resolution USB
flash drive takes longer time to read and display on the TV screen
The TV screen is blank and the player LED is blinking| •Turn off the TV box,
wait 30 seconds and turn on again
•Check if HDTV connection is correct or try changing the HDTV cable
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>