buzztv BT-300 Smart Remote User Manual
- June 9, 2024
- buzztv
Table of Contents
buzztv BT-300 Smart Remote
Button Legend
- Power
- Rewind
- Play / Pause
- BuzzTV / Live
- Menu
- DPad
- OK Button
- Back
- Home
- Volume Up / Down
- Red
- Yellow
- Numbers
- Page Down
- 15. Source
- Fast Forward
- Guide
- Mouse
- Channel Up / Down
- Last Channel
- Information
- Green
- Blue
- Page Up
BuzzTV Smart Remote App
NOTE¹: Requires BT-400 and an enabled device. The remote must be BT paired to the device
NOTE²: If you are not using TV source pair, do not enable max audio on
device
(Found in Buzz utilities under Volume control)
From the App you will be able to control
Auto source pair your TV to the BT-400
This allows the user to have BT-400 control the TVs Power button, Volume up
and down, the TV input source. Click on the tab in the app and the app will
walk you through the set up.
Control the BT-400 Backlight
Program your backlight On or Off. Click on the tab and it will take you to the
setting inside the device, select remote and you will see the toggle choice.
(This feature is off by default for greater battery life)
BT Remote Pairing and Factory Reset
BT Remote Pairing
To place the remote into BT Pairing Mode, simultaneously press and hold the OK
button and the HOME button for 4 seconds until it starts blinking, this
indicates the remote is in Pairing Mode.
BT Remote Factory Reset
If you wish to factory reset your remote to erase all settings press and hold
the D-Pad Down button and the 0 (Zero) button for 4 seconds until it blinks 3
times to indicate the remote is factory reset
Manual TV Source Pair (2 methods)
The manual TV source pair allows control of:
- TV ON / OFF
- Volume up and down
- TV input source change
NOTE: The BT-400 and BT-300 will pair with most popular brands, if you have an older TV or off brand this feature may not work.
The following TV brands are pre-programmed on the numeric keys (1 thru 0)
- Samsung
- LG
- Sony
- Panasonic
- TCL / Thomson
- Toshiba
- Grundig
- Sharp
- Haier
- Philips
Method 1: TV Programming Mode with a Top 10 TV Brand
Simultaneously press and hold the OK button and the Fast Forward button for 4
seconds. The remote will blink 3 times to indicate the remote is in TV source
pair mode.
From the Top 10 list
on page 5, find your TV code (Ex. Sony is the 3 button) Press the number
associated with your TV on the remote numeric keypad. This will pair the
BT-400 to the TV. The TV volume control should appear on the TV screen which
indicates you are TV source paired.
Method 2: TV Brand Search
First be within 1 meter to the bottom of the TV.
Simultaneously press and hold the Rewind and OK button for 4 seconds. The
remotes LED indicator will blink 3 times and then turn solid red. This
indicates the remote is in TV search mode. 
Slowly press the Channel Up button on the remote once about every 3 seconds. When the volume indicator on the TV displays, discontinue pressing the Channel Up button and press the OK button. You are now TV paired.
Static Mouse (Only in BT mode)
Press the Cursor button to enable the Static Mouse Mode.
In Mouse Mode, the
Remote Control supports [Up], [Down], [Left], [Right] and [OK] buttons.
While using the Static Mouse if the user does not press any button for 15 seconds from the last button press, The Remote Control will exit Mouse Mode.
Warranty Information
For warranty information and registration, please visit: www.buzztv.com/register
Email:www.buzztv.com/support
Website: CS@buzztv.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>