buzztv X5 AI SERIES Android TV Box – Future-Proof Streaming Device User Manual
- June 9, 2024
- buzztv
Table of Contents
X5 AI SERIES Android TV Box – Future-Proof Streaming Device
**User Manual
X5 AI SERIES
User Manual
**
**Package Contents
**
**Connection
**
AV Connection
a. Connect the AV cable of the 3 color (red/ white/yellow) to the X5’s AV
output interface, and the other end to the TV’s AV input interface. Connection
can be made by
colour.
b. Power on the X5. Set the TV video mode to AV input. 
HDTV
Connection
a. Connect HDMI cable to the X5’s output interface, and the other end to the
TV’s HDMI input interface.
b. Power on the X5. Set the TV video mode to HDTV input.
Antenna Connection
a. Attach both antennas to set top box
Installation Steps
- Connect X5 AI Series TV Box to the power supply.
- Connect X5 to your TV with an HDMI Cable or AV Cable.
- For a wired connection, plug-in an Ethernet cable from the TV Box to your modem or router. For wireless, choose your Wi-Fi network and input your Wi-Fi password.
- LED Light: Blue ON Red OFF
Troubleshooting
Warni n g: Under no circumstances should you try to repair the X5 AI
Series by yourself, as this will invalidate the warranty.
Do not open it as there is a risk electrical shock. If any fault occurs,
please first check with this troubleshooting checklist. If you are unable to
remedy a problem by following this guide, contact your dealer for help.
| Problem | Solution |
|---|---|
| No Power | •Check if the power adapter is properly connected to the power and |
the TV box
•Press the power on the remote controller to turn on the power
No Picture| •Re-Connect the HDTV cable or AV cable
•Check if the N is powered on
No sound or distored sound| •Adjust the volume
•Check that the speakers are connected correctly
The N box does not respond to the remote control| •Aim the remote control
directly at the sensor on thefront of the N box
•Reduce the distance to the TV box
•Replace batteries in the remote control
•Possibility of system crash, disconnect and reconnect the power supply
No sound during playback| •The audio codec may not be supported by the TV box
•Check the volume
The contents of the USB or flash drive cannot be read| •The USB or flash drive
format is not compatable with the box
•If one of the USB can not be read, please turn off the N box for 30 seconds
and restart the N box
Slow operation of the USB flash drive| •Large file size or high resolution USB
flash drive takes longer time to read and display on the N screen
The N screen is blank and the player LED is blinking| •Turn off the N box,
wait 30 seconds and turn on again
•Check if HDN connection is correct or try changing the HDN cable