oraimo OFB-21 Smart Fitband User Guide
- June 5, 2024
- oraimo
Table of Contents
oraimo OFB-21 Smart Fitband
product overview
Setting up the fit band on your phone
To get started
- Find the 2 App in one of these locations, depending on your device:
- Install the App. Note that if you don’t have an account with the store you’ll be required to create one before you can download the App.
- When the App is installed, open it and be guided through!;Jh a series of questions that help you create your account or log in to your existing account
- Continue following the onsueen instructions to connect or pair the product to your phone or tablet
- Your account asks for information such as height weight and gender to make various calculations such as stride lengths to estimate distance and basal metabolic rate to estimate calorie bum. You can modify your information in 2-Profile-Me.’Mien you’re done pairing, read through the guide about this product and then explore the dashboard.
Getting To Know Your Smart F1tband
Wrist Placement
Comfortably tighten the band around your wrist about one finger width away
from your wrist
Note: wearing the wristband too loosely may import the data collection by
the sensor.
Insert the device’s charging plug into the USB port.
Waking A Dimmed Screen
- if the fit band is switched off, long-press the Touch Button to switch on.
- When you’re not using the fit, the display is off. You can tum your wrist towards you to wake it up. This function. known as light Up, can be turned off in your smart fitband settings in Joyvear
UsinglheClock Face &Menus
The home screen is a dock. On the dock face you can tap to see your steps
taken, distance, calories burned. training. message, and other functions.
Informa ion or use different functions on your smart fit nd. The following
menus
- change clock face
- heart rate
- steps
- distance
- Training – long press for 3 seconds to enter and ap to scroll through different training modes, running, cycling. skipping, swimming. table tennis, badminton, tennis and cricket Long press for 3 seconds to start the training and long press for 3 seconds to end.
- Calories Burned –
- Message-
- FUNCTION
- FUNCTION INFO
- FUNCTION RESET
- FUNCTION OFF
- FUNCTION FIND ME
- FUNCTION BRIGHTNESS
Is the product waterproof?
This product supports IP67 waterproof which allows the product to be held in
water for a maximum of 30 minutes at a depth of 1 metre. You can wear it while
washing your hands, having a cold shower or washing your car. Please do not
wear it while diving or scuba diving. Are athere data left when product will
be kep in produc for seven d ys. When product is connected with
mobile, data will be uploaded to mobile automatically. Kindly synchronize
product data to mobile in time.
Note: Call and message notifications only work under BT connection
status.
FCC Rules
FCC Caution: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation. Arry
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits
for aClass B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radiofrequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does muse harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
CAUTION
- Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to theinstructions.
- The product shall only be connected to a USB interface of version U5B2.0
- The adapter shall be installed near the equipment and shall be easily accessible.
- Do not try to disassemble this product to make any modifications, because it does not contain any repair components.
- EUT Temperature: Ot -+60t(Standalone),0°C -+40°C(With Parts}.
in accordance with
Annex VI of Directive 2014/53/EU of the European Parliament and of the Council
-
For the following Radio equipment:
Model: OFB-21
Product:SmartFitband
Trade name or Brand: oraimo
Software/ Hardware number. RH166BV / RH166-V05 -
Name and address of the manufacturer or his authorised representative: Manufacturer. ORAIMO TECHNOLOGY LIMITED
Add: ROOM 604 6/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON ROAD TST KL -
This declaration of conformity is issued under the sole responsibility of the Manufacturer.
-
Object of the declaration (identification of the radio equipment allowing traceability: it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):
-
The object of the declaration described above is in conformity with the relevant Union harmonization legislation:
Directive 2014/53/EU(RED) -
References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:
Article 3.la Health: EN 62479: 2010
Article 3.la Electrical Safety: EN62368-1:2014+All:2017
Article 3.lb: Draft ETSI EN 301489-1 V2.2.1 (2019-03) -
Notified Body Name: MET Laboratories, Inc.
Notified Body Number: 0980
Notified Body Assessment Performed:
Module B/C on Article 3.la, 3.lb, 3.2 and 3.3
Technical File Identification Number: N/A -
Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:
User instructions are provided in the User Manual. The Software and Hardware versions are specified above. -
Additional information:
Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without infringing applicable requirements on the use of radio spectrum.
Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorisation of use. Please refer to theUser Manualfor details.
On behalf of:
Manufacturer: ORAIMO TECHNOLOGY LIMITED
Add: ROOM 604 6/F SOUTH TOWER WORLD FINANCE CTR HARBOUR OTY 17 CANTON ROAD TST KL
(place and date of issue): Shenzhen, 2019-12-23 (name, function}: Yiting Luo/ Manager
Warranty Terms & CONDITION
- All quality-related defects on items sold directly by Alaimo or Alaimo’s authorized resellers are covered by an extensive warranty, starting from the date of purchase.
- Alaimo’s limited warranty is restricted to the country of purchase.
- This warranty covers only original Doraemon products. It is not applicable to normal wear and tear, or any defects arising from damage caused by misuse of this product.
- War_ranty is for the primary product only nor transferable. Any free additional product(s) are not covered in this warranty.
- If the product fails regardless of usage in compliance with the instruction manual and other written precautions, replacement will be provided free of charge.
- To receive a replacement, bring the warranty certificate and the product itself to the store from where you have purchased the product.