oraimo OSW-801 Watch 4 Plus User Guide
- May 15, 2024
- oraimo
Table of Contents
WELCOME GUIDE
oraimo Watch 4 Plus | osw-s01 |
- For safety issue, the product remains low capacity during shipping.
Please fully charge the product before initial use!
Product Overview
Setting Up Your Smart Watch
For the best experience we recommend using the updated oraimo Health App for iOS and Android.
https://static-ie.oraimo.com/qrc
ode/oraimoHealth.html
iOS 12.0 or above
Android 6.0 or above
Pair With Your Phone
-
Get ready with the oraimo Health App, scan the QR code on your watch or find the oraimo Health App in one of these locations, depending on your device:
-
When the App is installed, open it and follow the instructions that help you create your account, or login to your existing account.
-
Your account asks for information such as height, weight, and gender to make various calculations and tailor your experience using the app. You can modify your information in oraimo Health — Account – User
-
Long press the Home Button of the watch to turn it on, follow the onscreen instructions to setup the language, and get ready pairing with the phone.
Scan the QR code to pair:
Device QR code
If you can’t pair successfully, try the following methods:
- Make sure the BT permission is allowed for the app;
- Make sure the watch is not connected with another phone;
- Try turning off and on again the BT switch on your phone;
- If none of these work, try rebooting your phone and the watch, and repeat the above steps again.
After pairing with your phone, read through this guide to explore the various functions!
BT Call
Before pairing your phone and the watch for the BT Call function, make sure
the BT for call on the watch is switched on:
Method 1:
Press the home button in the main dial, tap the Phone menu item to switch on
the BT for call on the watch.
Method 2:
On the watch face, swipe down and see the following control panel, press the
BT icon to enable BT calling.
In the BT list of the mobile system,connect to “oraimo Watch 4 Plus”and you
can use the watch to make calls.
Some phones have separate BT and BLE, and you need to connect two devices with
the same BT name. Please check the BT list in the search and connect them.
In the BT list of the mobile system, connect to “oraimo Watch 4 Plus” and you can use the watch to make calls.
Getting To Know Your Smart Watch
Wrist Placement
For all-day wear, your watch should usually rest a finger’s width below your
wrist bone and lay flat, as you would normally wear a watch.
Charge Your Watch
Connect the metal contacts on the charging dock to those on the back of the
device, then put them on a flat surface.
Connect the charging cradle to a power supply, the device’s screen will light
up and display the battery level.
Wipe the metal contacts, and the device dry before charging.
Power On/Off
- When the watch is powered off, please connect it to the power and press the Home Button for 3 seconds to turn it on.
- Wake up the watch, press the Home Button for 3 seconds to select the Shutdown option, then the watch will vibrate and power off. You can also power off from the Settings menu (Settings – System – Shutdown).
- If there is a problem with the watch, please connect the power supply and press and hold the Home button for more than 12 seconds to force restart the watch.
Wake Up the Watch
When you’re not using this product, the display is off. To wake it up:
- Press the Home Button.
- Turn your wrist towards you. This function, known as “Raise to Wake”, can be turned off in Settings – Raise to wake – Raise to wake. You can also schedule when it’s activated during the day.
Using The Clock And Menus
The main screen is a clock where you can swipe to see data about your
steps, distance, calories, heart rate, and functions like training modes,
weather, message, music, etc.
Troubleshooting
Can‘t connect with BT.
- Make sure your device supports BT 5.2. Make sure your device’s software is or above iOS 12.0 or Android 6.0.
- Restart BT and reconnect after 20 seconds.
- Restart your phone.
- Make sure your phone is not connected with other devices.
- Make sure oraimo Health App is running in your phone’‘s system.
Can‘t find the watch in BT.
Make sure your phone’s location service is enabled.
Make sure the watch has enough power, it’s not connected with another phone
and is powered on. Also you need to keep it close to your phone.
If you still cannot find it, please turn off your phone’s BT function and
reconnect after 20 seconds.
Can’t monitor heart rate, oxygen, pressure, respiratory rate.
To ensure the accuracy of the monitor, please wear the smart watch tightly
with at least one finger’s distance from the wrist bone, and place the optical
sensing monitor directly on the skin without any obstruction.
Can’t receive notifications after enabling it.
Android: Make sure the watch is connected to your phone. Allow oraimo
Health App to access notifications. If you have any security Apps installed,
add oraimo Health to the trust list.
iPh: Make sure the watch is connected to your phone. Reboot your phone and try
to reconnect with the product.
Is the product waterproof?
This product supports IP68 waterproof. You can wear it while washing your
hands, having a cold shower, or washing your car. Please do not wear it while
diving or scuba diving.
Do I need to connect BT all the time? Will my health and sleep data stored
if not connected to the phone?
Your data will be kept in the watch for seven days. When it is reconnected
to the phone, your health and sleep data will be synced automatically. Please
remember to synchronize data with the phone in time to get maximized utility.
Note: Call and message notifications only work when BT is connected.
Basic Product Specifications
Display Screen | 2.01″ TFT 240*282 |
---|---|
BT Version | V5.2 |
Battery Capacity | 300mAh |
Battery Type | Lithium Polymer Battery |
Charging Time | 3h |
Normal Using Time | Up to 7 days * oraimo Lab test result |
Standby Time | 30 days * oraimo Lab test result |
Watch Size | 53.439.111.5mm (without strap) |
Weight | 41g (with strap) |
Material | ABS/PC/Silica Gel |
Waterproof | IP68 |
Customer Service
365 DAYS WARRANTY
Email
service@carlcare.com
India: care@oraimo.com
Warranty Certificate
Name :|
---|---
Address :|
Tel. No. :|
Date of purchase : (dd/mm/yy)|
Store name :|
Warranty period :|
Warranty Terms & Conditions
-
All quality-related defects on items sold directly by oraimo or oraimo’s authorized resellers are covered by an extensive warranty, starting from the date of purchase.
-
oraimo’s limited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly from an authorized online purchase.
-
This warranty covers only original oraimo products. It is not applicable to normal wear and tear, or any defects arising from damage caused by misuse of this product.
-
Warranty is for the primary product only nor transferable. Any free additional product(s) are not covered in this warranty.
-
If the product fails regardless of usage in compliance with the instruction manual and other written precaution, replacement will be provided free of charge.
-
To receive replacement, bring the warranty certificate and the product itself to the store from where you have purchased the product.
User Manual
Smart Watch
Model: OSW-801
Hereby, ORAIMO TECHNOLOGY LIMITED
Declares that this Smart Watch is in compliance with the essential
requirements and other relevant provisions of directive 2014/53/EU.
CAUTION:
-
Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
– disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
– leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
– a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. -
EUT Temperature: 0 C -+45 C (Standalone). 0 C -+40 C (with adapter).
Operating Frequency:
BT: 2400-2483.5MHz (TX/RX);
Modulation mode: GFSK , n/4-DCIPSK 8DPSK(BT) GFSK (BLE)
Max. Of Transmit power: BT(EDR): 3.59dBm BLE: -0.23dBm
FCC Caution:
Labeling requirements.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Information to user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Note: This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
EU Declaration of Conformity
in accordance with Annex VI of Directive 2014/53/EU of the European Parliament
and of the Council For the following Radio equipment:
Model: OSW-801
Product: Smart Watch
Trade name or Brand: oraimo
Software / Hardware number: V1.0.3/ RH281L_V02
-
Name and address of the manufacturer or his authorized representative:
Manufacturer: ORAIMO TECHNOLOGY LIMITED
Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT HONGKONG -
This declaration of conformity is issued under the sole responsibility of the Manufacturer.
-
Object of the declaration (identification of the radio equipment allowing traceability; it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):
-
The object of the declaration described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU (RED)
-
References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:
Article 3.1a Health:| EN42479:2010
---|---
Article 3.1a Electrical Safety:| EN62368-1:2014+A11:2017
EN IEC 62368-1: 2020+A1: 2020
Article 3.1b:| ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.4(2020-09)
Article 3.2:| ETSI EN 300 328 V2.2.2 (2019-07) -
Notified Body Name: — Eurofins Electrical and Electronic Testing NA, Inc.
Notified Body Number: 0980
Notified Body Assessment Performed: Module B/C on Article 3.1a, 3.1b and 3.2 Technical File Identification Number: N/A -
Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity: User instructions are provided in the User Manual. The Software and Hardware versions are specified above.
-
Additional information:Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without infringing applicable requirements on the use of radio spectrum.
Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorization of use.Please refer to the User Manual for details.
On behalf of:
Manufacturer: ORAIMO TECHNOLOGY LIMITED
Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET
FOTAN NT HONGKONG
(place and date of issue):Shenzhen, 2023-08-07
(name, function): Nengyong.Wu / Manager
—(signature):
(Name and signature of person responsible)
For more information, please visit:
www.oraimo.com| @oraimo accessories
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>