EAR CLIP C01 Wireless Bluetooth Headset User Manual

June 15, 2024
EAR CLIP

C01
Wireless Bluetooth headset

EAR CLIP C01 Wireless Bluetooth Headset Wireless earplugs smart touch and Comfortable to wear

Parameter configuration

Pairing name: C01
Bluetooth version: BT5.3
Bluetooth profile: IFP V1.7; HSP V1.2; A2DP V1.3; AVRCP V1.6
RF carrier frequency: 2402MHz-2480MHz
Charging current: headphone DC5V-40MA charging box DC5V-300mA
Battery capacity: 200mAh charging case, 40mAh headset
Charging time: earphone about 1h, charging case about 2h
Listening time: about 6h
Bluetooth receiving distance: <15 meters (barrier-free)

EAR CLIP C01 Wireless Bluetooth Headset - Charging
contact

Instructions for use

  1. Pairing and connection: Take out the earphones from the charging box, turn on the left and right ears at the same time, and the two earphones will automatically pair, and the Bluetooth name will appear in the Bluetooth search area of the phone, click Connect
  2. Boot: When charging in the charging bin, pick up the automatic boot pairing back
  3. Shutdown: Put the charging bin charging automatic shutdown
  4. Answer a call: Tap the left/right channel once
  5. Hang up: Tap the left/right channel once
  6. Reject the call: Press and hold the left/right channel for 2 seconds
  7. Pause the song: Tap the left/right channel once
  8. Volume plus: Touch the right channel twice (automatically switch with the main and secondary machines)
  9. Volume reduction: Touch the left channel twice (automatically switch with the main and secondary machines)
  10. Previous: Touch the right channel 3 times
  11. Next: Touch the left track 3 times
  12. Summon Siri: Press and hold the left/right voice channel for 3 seconds
  13.  Manual switch: Press and hold the left/right channel for 5 seconds

Charging case

  1. Put the earphone into the charging case, the earphone red light is steady on, the charging case bright light flashes red light quickly, when the earphone is charging: the peripheral 7-color bright light breathes and flickers for 30 seconds and then sleeps; After the battery is fully charged, the headset’s red light is off
  2. Charge the charging box: the color light is red breathing flash, and the red light is long after it is full
  3. When the charging box is low: The red light blinks three times quickly

(Please note that it is important to use the 5V1A charging cable to charge the Bluetooth headset charging case or use the charging cable delivered when purchasing the product)

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals