oraimo OEB-E108D FreePods Pro Active Noise Cancelling Earbuds User Guide

June 5, 2024
oraimo

OEB-E108D FreePods Pro Active Noise Cancelling Earbuds

Free Pods Pro

WELCOME GUIDE For safety issues, the product remains low capacity during I shipping. Please fully charge the product before initial usel
Please read this Guide carefully before using the product

Package Contents

Product Overview

*Basic Product Specifications Lab test result
**

EARBUDS

| Charging time: 1.5 hours
Range: 10m| Battery capacity: 70mAh (each earbud)
Music playtime: Up to 13 hours; Case provides additional 30 hours (ANC OFF) Up to 9 hours; Case provides additional 23 hours (ANC ON)

CHARGING CASE

Charge times for earbuds. Up to 2 5 times Charging time: 2 hours
Battery capacity: 510mAh

Using Your Earbuds
Turn On & Pairing

  • Earbuds will turn on and enter pairing mode automatically when opening the lid for the first time use.
Earbud Status Indicator Status
Flashing green and red alternatively on the right earbud Bluetooth Pairing
Lights off Connected to a device

Make sure the distance of the earbuds and your device is less than 1 meter / 3.3 feet at the first time of connection.
When turned on, the earbuds will automatically connect to the last connected device if available.
If not, the earbuds will automatically enter pairing mode.
If you want to clear the pairing list, press the reset button for 5s to clear the list with the lid opened.
Under any abnormal condition, return the earbuds to the charging case with the lid closed for Los and then take out it again.
Turn Off


When the earbuds are in the charging case and the lid is closed, it will automatically turn off after being fully charged.

Charging Your Earbuds

Earbuds will be charged automatically once they are returned to the charging case with the lid closed

It has a voice prompt when the battery of the earbuds is low
Charging Your Case

Case Status Indicator Status
Low battery Being charged
Middle battery
High battery
Lights off Fully charged

Use then indudnel Typo C charging table m charge the GIs°
Case Power Level

Case Status Indicator Power Level
Steady red for two seconds and off Low
Steady orange for two seconds and off Medium
Steady green for two seconds and off High

Meke: we arse the lid then press the reset button once to diet& the caring power.

Pop-up Notification- Google Fast Pairing

Controls

Pop-up notification is considered compatible with Android 6.0 or above, and your device must support Google Play service at the same time


| Tap on one earbud once| Play/Pause
| Tap on one earbud twice| Next track
| Tap on one earbud for three times| Previous track



| Tap on one earbud once| Answer a call
| Tap and hold on one earbud then release when you hear 2 beeps| Reject call
| Tap on the earbud twice| End/cancel a call
ANC

| Tap and hold on left earbud then release when you hear 2 beeps| Switch among
Active Noise Cancellation, Transparency Mode, and Off with voice prompt

ANC function only works when placing both earbuds in your ears.

Others

| Long press the reset button on the charging case then release when the case indicator light flashes once| Restore factory settings
| Tap on any earbud twice and hold on to it then release when you hear 6 beeps| Enter pairing mode and try to connect to the new device
| Tap and hold on left earbud then release when you hear 4 beeps| EQ switch with voice prompt HavyBass –es Normal Mode
| Tap and hold on the right earbud then release when you hear 4 beeps| Game Mode switch
with voice prompt
| Tap and hold on the right earbud then release when you hear 2 beeps| Activate Voice Assistant

Game Mode supports an extra low-latency effect to enhance the game experience.
HavyBass is proprietary sound-tuning technology to increase low-frequency for deep and powerful bass in the music.
*EQ Switch and Game Mode only work when placing both earbuds in your ears.

For more information, Please visit:

|
---|---
http://www.oraimo.com| https://www.facebook.com/oraimoAccessories

Attention

  • Use original or certified cables
  • Do not expose to liquids
  • Do not disassemble
  • Avoid dropping
  • Avoid extreme temperatures
  • Do not use the product outdoors during a thunderstorm
  • Do not use any corrosive cleaner/oil to clean

Considerate Hints

  1. Do not turn up the volume to a fair high level constantly as this could shorten the service life of this product or impair your hearing.
  2. When encountering any fault during operation, please cut off the power supply and disconnect the Type-C cable to prevent further damage to the product or other components.
  3. The wireless transmission range or connectivity could be affected by low battery power In that case, please recharge immediately.

Customer Service
365 DAYS WARRANTY
Email
India: care.in@oraimo.com
Nigeria: care.ng@oraimo.com
Kenya: care.ke@oraimo.com
Ghana: care.gh@oraimo.com
Morocco: care.ma@oraimo.com
Africa: service@carlcare.com
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

True wireless earbuds Model: OEB-E108D Hereby, ORAIMO TECHNOLOGY LIMITED. Declares that this True wireless earbud in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU.
Caution

  1. Use carefully with the earphone may be excessive sound pressure from earphones and headphones can cause hearing loss.

  2. Risk of explosion if the battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
    – disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
    – leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
    – a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

  3. The product shall only be connected to a USB interface of version USB 2.0.

  4. EUT Temperature: 0r +40 C (Standalone), 0-*40 “C (with adapter).

  5. To prevent possible hearing damage, do not listen at high volume levels for long periods.

  6. USB cable is shielded.

Operating Frequency:
BT: 2402-2480MHz
Modulation mode:
GFSK, n/4-DOPSK, 8DPSK GFSK(BLE)

EU DECLARATION OF CONFORMITY

in accordance with
Annex VI of Directive 2014/53/EU of the European Parliament and of the Council

  1. For the following Radio equipment: Model: OEB-E108D Product: True wireless earbuds Trade name or Brand: oraimo Software / Hardware number. V0.2.2 / V1.0.0
  2. Name and address of the manufacturer or his authorized representative: Manufacturer ORAIMO TECHNOLOGY LIMITED Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT
  3. This declaration of conformity is issued under the sole responsibility of the Manufacturer.
  4. Object of the declaration (identification of the radio equipment allowing traceability; it may include a color image of sufficient clarity where necessary for the identification of the radio equipment):
  5. The object of the declaration described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU (RED)
  6. References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared: Article 3.1a Health: EN 62479:2010 Article 3.1a Electrical Safety: EN62368-1:2014+A11:2017 Article 3.1b: ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-17 V3.2.4 (2020-09) Article 3.2: ETSI EN 300 328 V2.2.2 (2019-07)
  7. Notified Body Name: Eurofins Electrical and Electronic Testing NA, Inc. Notified Body Number: 0980 Notified Body Assessment Performed: Module B/C on Article 3.1a, 3.1b, 3.2 and 3.3 Technical File Identification Number N/A
  8. Where applicable, description of accessories and components, including software, which allows the radio equipment to operate as intended and covered by the EU declaration of conformity: User instructions are provided in the User Manual. The Software and Hardware versions are specified above.
  9. Additional information: Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without infringing applicable requirements on the use of radio spectrum. Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorization of use. Please refer to the User Manual for details. On behalf of: Manufacturer ORAIMO TECHNOLOGY LIMITED Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT (place and date of issue): Shenzhen, 2021-11-03 (name, function): Yiting,Luo/ Manager
    (signature):

WARRANTY CERTIFICATE

Name :|
---|---
Address :|
Tel. No. :|
Date of purchase : (dd/mm/yy)|
Store name :|
Warranty period :|

WARRANTY TERMS & CONDITIONS

  • All quality-related defects on items sold directly by oraimo or oraimo’s authorized resellers are covered by an extensive warranty, starting from the date of purchase.
  • oraimo’s limited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly from an authorized online purchase.
  • This warranty covers only original oraimo products. It is not applicable to normal wear and tear, or any defects arising from damage caused by misuse of this product.
  • Warranty is for the primary product only nor transferable. Any free additional product(s) are not covered in this warranty.
  • If the product fails regardless of usage in compliance with the instruction manual and other written precautions, a replacement will be provided free of charge.
  • To claim the warranty, contact the services team from the platform or store where you bought from.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals