oraimo OSW-32 Watch 2 Pro User Manual

June 3, 2024
oraimo

oraimo LOGO

oraimo OSW-32 Watch 2 Pro

WELCOME GUIDE
For safety issue, the product remains low capacity during shipping.
Please fully charge the product before initial use!
Please read this Guide carefully before using the product

Product Overview

oraimo OSW-32 Watch 2 Pro-1

Setting Up Your Smart Watch

For the best experience we recommend using the updated oraimo Health App for iOS and Android.

Pair With Your Phone

  1. Get ready with the oraimo Health App, scan the QR code on your watch or find the oraimo
    Health App in one of these locations, depending on your device:
    The Apple App Store for iPhone.
    The Google Play Store for Android phone.

  2. When the App is installed, open it and follow the instructions that help you create your account, or login to your existing account.

  3. Your account asks tor intormation such as height, weight, and gender to make various calculations and tailor your experience using the app. You can modity your information in oraimo
    Health – Account – User

  4. Long press the side button of the watch to turn it on, follow the onscreen instructions to setup the language, and get ready pairing with the phone.

Scan the QR code to pair:

oraimo OSW-32 Watch 2 Pro-3

oraimo OSW-32 Watch 2 Pro-4

oraimo OSW-32 Watch 2 Pro-5

It you can’t pair successtully, try the following methods:

  1. Make sure the BI permission is allowed tor the app;
  2. Make sure the watch is not connected with another phone;
  3. Try turning ott and on again the BT switch on your phone;
  4. It none ot these work, try rebooting your phone and the watch, and repeat the above steps again.
    After pairing with your phone, read through this guide to explore the various functions!

Bluetooth Call
Before pairing your phone and the watch tor the Bluetooth Call tunction, make sure the Bluetooth tor call on the watch is switched on:

Method 1:
Press the side button in the main dial, tap the Phone menu item to switch on the Bluetooth for call on the watch.

oraimo OSW-32 Watch 2 Pro-6

Method 2:
Swipe down trom the main dial to enter the below intertace, tollow the picture to turn on the Bluetooth for call.

And then find the “oraimo vwatch 2 Pro_AXAX device in your phone’s Bluetooth – AVialable Devices list. Iap on the name and tap “Yes in the pop-up window.

oraimo OSW-32 Watch 2 Pro-8

  1. After you are connected, choose Dialpad to start calling.
  2. In the Contact menu, up to 10 contacts can be displayed. You can sync the contact information from the App by selecting Devices oraimo Watch 2 Pro – Bluetooth Call-Sync contacts.
  3. Choose Recent Call to see your recent contacts since the the Bluetooth Call function is enabled.
    Up to 20 recent calls can be displayed.

Getting To Know Your Smart Watch

Wrist Placement
For all-day wear, your watch should usually rest a finger’s width below your wrist bone and lay tlat, as you would normally wear a watch.

Charge Your Watch
Connect the metal contacts on the charging dock to those on the back of the device, then put them on a tlat surtace.

oraimo OSW-32 Watch 2 Pro-10

Connect the charging cradle to a power supply, the device’s screen will light up and display the battery level.

oraimo OSW-32 Watch 2 Pro-11

The charging dock is not water resistant. Wipe the port, metal contacts, and the device dry betore charging

Power On/Off

  • When the watch is powered oft, charge the watch or long pres the home button tor 3 seconds to power it on.
  • When the watch is turned on, press and hold the side button for 3 seconds. Choose Power Off and tap again to contirm. The watch vibrates and turns oft. You can also power oft trom the “Settings menu. (Settings – System Settings – Power Ott)

Wake Up the Watch

  • When you’re not using this product, the display is off. To wake it up:

  • Press the side button.

  • Turn your wrist towards you. This function, known as “Raise to Wake”, can be turned off in Settings- Raise to wake – Raise to wake. You can also schedule when it’s activated during the day.
    Using The Clock And Menus

  • The home screen is a clock. From here you can swipe to see data about your steps, activity time,calories, heart rate, and tunctions like training modes, weather, message, music, etc.

Troubleshooting
Can’t connect with BT.

  1. Make sure your device supports BT 5.1. Make sure your device’s software is or above iOS 11.0 or Android 6.0.
  2. Restart Bl and reconnect atter 20 seconds.
  3. Restart your phone.
  4. Make sure your phone iS not connected with other devices.
  5. Make sure oraimo Health App is running in your phone’s system.

Can’t find the watch through Bluetooth.
Make sure your location services are enabled (GPS is woking), the product has enough power,it’s not connected with another phone and is powered on, then keepit close to your phone.
It you still can not find it, please turn ott your phone’s BT function and reconnect atter 20 seconds.

Can’t monitor heart rate.
Make sure you wear the watch tightly enough and it’s positioned properly to monitor heart rate.

Can’t receive notifications after enabling it.
Android phone: Make sure the product is connected with your phone. Allow oraimo Health App to access notifications. If any security App installed, add oraimo Health to trust list.
iPhone: Make sure the product is connected with your phone. Reboot your phone and try to reconnect with the product.

Is the product waterproof?
This product supports IP68 waterproof which allows the product to be held in water for a maximum of 30 minutes at a depth ot 1 metre. You can wear it while washing your hands, having a cold shower or washing your car. Please do not wear it while diving or scuba diving.
Do I need to connect BT all the time? Will my health and sleep data stored if not connected to the phone?
Data will be kept in the watch tor seven days. When it is reconnected to the phone, your health and sleep data will be synced automatically. Please remember to synchronize data with the phone in time to get maximized utility.

Note: Call and message notifications only work when BT is connected.
Basic Product Specifications Lab test result

oraimo OSW-32 Watch 2 Pro-12

FCC Caution

Any Changes or moditications not expressly approved by the party responsible tor compliance could void the user’s authority to operate the equipment.
This device complies with part 15 ot the FCC Rules. Operation is subject to the tollowing two conditions: (1) This device may not cause harmtul interterence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Important Note:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Ihese limits are designed to provide reasonable protection against harmtul interterence in a residential installation. This equipment generates,uses and can radiate radio trequency energy and, it not installed and used in accordance with the instructions, may cause harmful interteren ce to radio communications. However, there is no guarantee that interterence will not ocCur in a particular installation. If this equipment does cause harmtul interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment inta an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Smart Watch
Model: OSW-32
Hereby, ORAIMO TECHNOLOGY LIMITED
Declares that this Smart Watch is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU.

Caution

  1. Risk of explosion it battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
    • disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
    • leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
    • a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  2. EUT Temperature: 0C~+53 C (Standalone). 0 C ~+40 C(with adapter).

EU Declaration of Contormity in accordance with
Annex VI of Directive 2014/53/EU of the European Parliament and of the Council

  1. For the following Radio equipment:
    Model: OSW-32
    Product: Smart Watch
    Trade name or Brand: oraimo
    Software / Hardware number: 1.2.0/V1.1

  2. Name and address of the manufacturer or his authorized representative:
    Manufacturer: ORAIMO TECHNOLOGY LIMITED
    Address: FLAT 39 8/F BLOCK D WAH LOk INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT

  3. This declaration of conformity is issued under the sole responsibility of the Manufacturer.

  4. Object of the declaration (identification of the radio equipment allowing traceability:
    it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):

  5. The object of the declaration described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU (RED)

  6. References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:
    Article 3.1a Health: EN 62479:2010
    Article 3.1al
    Article 3.1b: ETSI EN 301 489-1 v2.2.3 (2019-11)
    cal Safety: EN62638-1:2014+A11:2017
    ETSI EN 301 489-17 V3.2.4 (2020-09)
    Article 3.2: ETSI EN 300 328 V2.2.2 (2019-07)

  7. Notified Body Name: Eurofins Electrical and Electronic Testing NA, Inc.
    Notified Body Number: 0980
    Notified Body Assessment Performed: Module B/C on Article 3.1a, 3.1b, 3.2 and 3.3
    Technical File Identification Number: N/A

  8. Where applicable, description of accessories and components, including software,which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:
    User instructions are provided in the User Manual. The Software and Hardware versions are specified above.

  9. Additional information:
    Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without intringing applicable requirements on the use of radio spectrum.
    Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorisation of use. Please refer to the User Manual for details.
    On behalf of:
    Manufacturer: ORAIMO TECHNOLOGY LIMITED
    Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT
    (place and date of issue): Shenzhen, 2022-3-11
    (name, function): Yiting, Luo/ Manager (signature): tin 0

Warranty Certificate

Name
Address:
Tel. No. :
Date of purchase :
(dd/mm/yy)
Store name
Warranty period:

Warranty Terms & Conditions

All quality-related defects on items sold directly by oraimo or oraimo’s authorized resellers are covered by an extensive warranty, starting trom the date ot purchase. oraimo’s imited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly trom an authorized online purchase.
This warranty covers only original oraimo products. It is not applicable to normal wear and tear, or any detects arising trom damage caused by misuse of this product.
Warranty is for the primary product only nor transferable. Any free additional product(s) are not covered in this warranty.
If the product fails regardless of usage in compliance with the instruction manual and other
written precaution, replacement will be provided tree of charge.
To receive replacement, bring the warranty certificate and the product itself to the store from where you have purchased the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals