SPICE WSLW101 Neck Speaker Light Instructions

SPICE WSLW101 Neck Speaker Light

Instructions & Safety Warnings for product use. Please observe all safety warnings, The WFan is not a toy, treat it as a piece of equipment.
To prevent damage or harm ta those using this product and those around them, we ask that you observe all warnings. Please exercise caution when using this p1oduc1; it runs on a charged battery
Follow all instructions properly for charging and disposing of this battery.

• Input Power: DC SV 1.0A (USB charg·,ng system)
• Charging Battery: Nickel-metal hydrk:ie rechargeable batteries (built-in) 3.6V, 2000mAh
• Charging Time: Approx. 4 hours
• Continuous Operating time: Warmer -30mi/use&101us:es on full charge
• Speaker-Approx. 10hours
• LED Light -Approx 20 hours
• Dimensions: Approx7.5’x 1.4’x10′
• Body Weight: Approx 7oz
• Material : Body: ABS; Warmer:Aluminum: Arms: Silicon
• Accessory: USB charging cable
• country of origin: China
• Speakers: 0.59 x 0.43 inch
• Speaker piece: 1PC
• Maximum output power 1W + IW I RO
• Compatible profile A2DP, AVRCP, HFP
• Physical Range Approx lOM
• Specified Frequency band 2.4GHz band (2.402GHz~2.480GHz}

Device Pairing

Press the power button on the power.

Bluetooth ON/OFF
Press and hold the Multifunction button for more than 3 seconds and the true LED will blink to indicate that the device is ready for pairing  Bluetooth device. Poor to pairing. please renew the instruction manual Press
and hold the Multifunction bJUCll again for more than 2 seconds to tum off the power

How to use the speaker

1. To turn on press & hold Speaker on-off button for 3 seconds. Surrounding light
2. To play & stop music, push the center of the+/. volume control button. Use the+/- button to control volume.
3. To tum off. press&hold Speaker on/off button for 3 seconds

How to use with phone.

1. To answer an incoming call…..then listening to must, press the multifunction button.
   To reject an incoming can press & hold the Multifunction button for 3 seconds.

2. After answering a call, push the Multifunction button and you will hear the other person voice on your phone speaker. Push the Multifunction button a second time and their voice will be projected on the Speaker Light speaker.

3. To end a call, push&hold the Multifunction On button for3 seconds.

4. To completely turn off the phone connection push& hold the multifunction button again for 3 seconds.

How to use LED Light

1. To tum on the LED Light press & hold the LED Light button for J seconds and the light around the button will light up yellow and the LED lights wi!I flash.
2. Press the LEO Light again and enjoy continuous light
3. To tum off, press&hold the LED Light button for, 3 seconds

The battery needs to be fully charged before use.

1. Insert provided USB end of charging cable plug into to a power source: AC USB adapter, portable charger, Or PC USB port.
2. lnsert the Type-C USB charging cable plug into the small port of the product Always full insert USB charging cable Into both power-source and product when charging.

CAUTION:

• If used incorrectly, there is a risk of serious injury or death.
• When using, if this product overheats, smokes emits any strange smell immediately turn off the product and discontinue use. if this happens while charging. disconnect the USB charging cable at once.
• Please do not modify the battery with this product rod
• Please handle the USB charging cable with car to avoid bending or twisting.
• Do not connect or disconnect the USB connector
• Disconnect the USB plug when cleaning.
• This product is not waterproof so avoid Using in rain or other wet environments
• If the product does get wet wipe the water away immediately.
• Avoid handling products with dirty hands.
• Do not use it while sleeping or in the bathtub.
• This product is not a medical device.

About Bluetooth

The communication distance between a Bluetooth-equipped device and this device is approximately 10m. However, the communication distance may vary depending on the surrounding environment.
Wireless communication with all Bluetooth-enabled devices is not guaranteed. For compatibility between this device and Bluetooth-compatible devices, please refer to the instruction manuals supplied with each Bluetooth-compatible device.
The Bluetooth function of this product conforms to and Ns been certified by Japanese domestic standards and FCC standards (US standards). The use of the Bluetooth function may be restricted in
some countries and regions. Please check the conditions such as laws and regulations of the country/region when using this product overseas.
In the frequency band used by the Bluetooth function, In addition to home appliances, industrial. scientific, and medical devices, wireless stations that require a license, certain low power wireless statiom that do not require a license

What is a moderate temperature burn?

Even at moderately low temperatures (104-140°F), when in contact with the same part of the skin for long periods of time, moderate temperature burns may occur, which result in red spots or blisters. If there are signs of moderate temperature burns, see a doctor immediately.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>