D Addario PW-INSTC-25 DIY Solderless Pedalboard Cable System User Manual
- October 30, 2023
- D ADDARIO
Table of Contents
D Addario PW-INSTC-25 DIY Solderless Pedalboard Cable System
Product Information
DIY Solderless Instrument Connectors
The DIY Solderless Instrument Connectors are designed for easy and hassle-free connection of instrument cables. These connectors are ideal for musicians, sound engineers or anyone who requires quick and reliable cable connections. The connectors are made of high-quality materials that ensure durability and longevity. The connectors also feature a set screw that allows for a secure and stable connection.
Product Usage Instructions
- Start by cutting the cable to the desired length. Make sure to cut the cable cleanly and avoid any loose or overhanging strands of shielding.
- Loosen the set screw on the plug to allow clear entry to the plug barrel.
- Insert the cable into the open plug end with a twisting motion until it is fully seated. Ensure that the cable is inserted all the way into the plug barrel.
- Completely tighten the set screw to secure the cable in place.
- Repeat the above steps for the other end of the cable, if necessary.
- Your cable is now ready to use. Enjoy your hassle-free and reliable connection!
INSTRUMENT CONNECTORS
The D’Addario DIY Solderless Pedalboard Cable System is the ultimate solution for custom-wiring your pedalboard or rack gear. Producing flawless and great- sounding cables is as simple as cutting the cable to length, placing the cable end into the plug end, and securing the set screw. These connectors are designed to give you the most accurate and reliable reproduction of your sound, while the patented Geo-Tip design provides an improved connection in any pedal, amp, or jack. For use with the D’Addario 1/4” DIY Instrument Cable only. Sold separately.
HOW TO USE
- Cleanly cut the cable to desired length avoiding any loose or overhanging strands of shielding.
- Loosen set screw on plug to allow clear entry to plug barrel. Push cable into open plug end with a “twisting” motion until it is fully seated.
- Completely tighten set screw.
