Spice A6 Flame atmosphere Lamp wireless speaker User Manual
- June 5, 2024
- SPICE
Table of Contents
Spice A6 Flame atmosphere Lamp wireless speaker
User Manual
Operation method
Attention
- Please do not charge the lamp under the temperature of 0’C-40C.
- Not recommended for charging while using.
- Please pull off the USB cable after a full charge.
- Please do not charge the lamp in high -a humidity situation.
Power input
- Put the USB cable into the lamp, when charging the indicator is red, when full charging the indicator off
Installation instructions
► ( The pole is not included in standard accessories. To be ordered separately )
Instructions
ON/OFF key: press this button for 2 seconds to turn on/off the Wireless
Speaker; quick press invalid; Speaker in searching action when blue indicator
flashes fast, the indicator light turns on when speaker be connected
Successfully.
+ Next songN+ key: in Wireless mode press quick will go to the next song,
long press to increase the volume(when reaching the maximum volume, the
speaker will say “di di”),(press +- together to cancel the pairing )
– Last song- Key: in Wireless mode press quick will go to the last song,
long press to decrease the volume
▶II Play/pause Key: press quick to play/pause, long press is invalid
Short press to tum on the flame lamp mode, then short press to switch to the
normal mode,long press to change the light brightness, and then short press to
tum off the light. Short press to tum on the flame lamp mode,then short press
to switch to the normal mode,long press to change the light brightness, and
then short press to tum off the light.
Technical Parameters
| Version | v4.2 | Distortion rate | <10% |
|---|---|---|---|
| Wireless name | A6 | SNR | 70d8 |
| Transmission distance | >10M | Power Supply | 5V/600mA |
| Output power | 5W | Bulid-in high efficiency lithium battery | 3.7V/1800mA |
| Horn parameters | ∅ 52MM 4Ω5W |
Warranty Card
Applicable for
-
Since buying date, the user enjoys one year of free repair services under normal use. After one year, will be charged according to each component part cost.
-
In case of a change component, the part will be charged according to our company’s component part cost list
-
The following situations without free repair services in the warranty period 1)Damage caused by a natural earthquake, rat disaster, and unnormal use.
2)Damage caused by transportation, falls, and improper storage.
3)Consumable component,such as spare parts,batteries,light bulbs,etc.
4)Warranty information records are not complete, no purchase date, no buying shop seal, etc.
5)Featured using environment, such as humidity, sulfur area, high salty and on board, etc, easy corrosion area.
6)Using not according to the instructions.
7)Special offer. -
When returning to the factory for repair, the user should make sure the product is packed properly to avoid any damage during transportation.
-
The factory is not responsible for the damages caused by the users themselves unproper disassembling.
Important
Thank you for purchasing our products.
To guarantee your rights, please fill in this form properly, Thank you
Name
Address
Telephone
Invoice number
Purchase date
Item number
Dealers Note: this field requires the dealer’s seal!
Warning: Please keep this warranty paper for repair presentation.
Attention
In order to use the speaker correctly, and ensure the good performance of the speaker, please read carefully and observe below:
- Please do not impact the mainframe seriously
- Please do not contact benzene, diluent, and other chemicals
- Please do not be close to the magnetic and electric field
- Please avoid directly lighting and heating appliances
- Please do not repair, disassemble, or transform by users themselves
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>