Altronix NetWay3012P PoE+ Adapter-Converter Installation Guide
- June 4, 2024
- Altronix
Table of Contents
NetWay3012P
PoE+ Adapter/Converter
Installation Guide
Overview:
Altronix Netway3012P adapter passes PoE/PoE+ and converts PoE up to 24W to 12VDC up to 2A.
Specifications:
Agency Listings:
- CE
European Conformity.
Functions:
- 12VDC up to 2A (24W) adapter for non-PoE compliant IP devices.
- PoE+ Input Mode “A / B” compliant.
- Total combined power 30W.
- Passes PoE+ Mode “B” and converts PoE to 12VDC.
- Speed: 10/100 Mbps.
Additional Features:
- Power LED indicator.
- Compact insulated housing.
- Plug-and-play installation.
Physical and Environmental:
Dimensions (W x L x H): 3.8” x 2.5” x 1” (96.52mm x 63.5mm x 25.4mm).
-
Weight (approx.):
Product weight: 0.2 lb. (0.1 kg).
Shipping weight: 0.3 lb. (0.14 kg). -
Temperature:
Operating: 0ºC to 50ºC (32ºF to 122ºF).
Storage: – 40ºC to 70ºC (– 40º to 158ºF).
Relative Humidity: 85% +/– 5%.
Operating Altitude: – 304.8 to 3,048m.
Installation Instructions:
NetWay3012P is compatible with PoE+ switches or midspans.
The unit is not intended to be connected to outside plant leads.
-
Mount NetWay3012P in proximity to IP device utilizing mounting hole (Fig. 1, pg. 2).
Use a proper fastener and/or wall anchor when securing NetWay3012P to the wall. -
Connect the structured cable from port marked [IN] on NetWay3012P to ports marked [OUT] of midspan or switch (Fig. 2, pg. 3).
-
Connect the structured cable from port marked [OUT] on NetWay3012P to the IP device (Fig. 1, pg. 2).
-
Connect 12VDC output from NetWay3012P terminals marked [+ 12VDC –] to the power input of the IP device (Fig. 1, pg. 2). Polarity must be observed.
-
Power LED indicator will illuminate on NetWay3012P under normal conditions (Fig. 1, pg. 2).
Typical Application:
NetWay3012P Installation Guide
Power Sourcing Equipment:
NetWay3012P is compatible with the following Altronix PoE+ switches or midspans:
| Netway1X | Single port midspan injector, 30W. |
|---|---|
| Netway1D | Single port midspan injector, 60W. |
| NetWay8, NetWay16 | 8 or 16 port midspan, 30W max per port. |
| NetWay8M, NetWay16M | Managed 8 or 16 port midspan, 30W max per port. |
| NetWayBT Series | Network Managed 802.3bt 4PPoE Midspans, 90W max per port. |
| NetWayG Series | Network Managed PoE Midspans, 8 Port, 30W max per port. |
| NetWay4E Series | 4 Port PoE Switches, 120W total power, one 1Gb SFP port. |
| NetWaySP3 Series | 3 Port PoE Switches, 120W total power, one 1Gb SFP port. |
| NetWaySP4 Series | 4 Port PoE Switches, 120W total power, two 1Gb SFP ports. |
| NetWaySP8 Series | 8 Port PoE Switches, 120W total power, two 1Gb SFP ports. |
| NetWaySP4BT Series | 4-port Hardened 802.3bt 4PPoE Switches, 180W total power, |
two 1Gb SFP ports.
Rev. 042109
Installing Company: ……………Service Rep.
Name:………….Address:…………. Phone #: ………….
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA |
718-567-8181 | fax:
718-567-9056
website: www.altronix.com | e-mail:
info@altronix.com | Lifetime Warranty
IINetWay3012P G28V
NetWay3012P Installation Guide