EPIC FITNESS 5-50LB 3-Tier Horizontal Dumbbell Rack Owner’s Manual
- October 30, 2023
- EPIC FITNESS
Table of Contents
EPIC FITNESS 5-50LB 3-Tier Horizontal Dumbbell Rack Owner’s Manual
OWNERS MANUAL
3-Tier Horizontal Dumbbell Rack
WARNING
Serious injury or death can occur if caution is not used. To reduce the risk
of serious injury, read the following instructions and warnings. Keep these
instructions for future reference. Before beginning any exercise program,
consult your physician. This
is especially important for those over the age of 35 or those with pre-
existing health conditions.
- This rack has an 800LB capacity
- This product meets industry standards for stability when used for it’s intended purpose in accordance with the instructions provided.
- Using this rack for support during stretching or attaching resistance bands, straps, ropes, or any other means to this rack may result in serious injury.
- It is the responsibility of the owner to ensure that all users of this rack are adequately informed of all precautions.
- Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
- Keep children and pets away from this product at all times.
- Keep this product indoors, away from moisture and any other water.
- Place the rack of a clean, flat, and level surface.
- Manufacturer is not responsible for any injury or death caused by improper use or improper assembly.
- This product is designed and intended for consumer/home use only in an indoor environment. Do not use it in a commercial, rental, or institutional setting.
MAINTENANCE
The safety and integrity designed into this rack can only be maintained when
the equipment is regularly examined for damage and repaired. It is the sole
responsibility of the user/owner to ensure that regular maintenance is
performed. Worn or damaged
components should be replaced immediately and stop using the equipment until
the repair is made.
- Wipe rack regularly to prevent accumulation of dust.
- Use a dry cloth to clean the metal frames.
- Avoid acid chlorine based cleaners and those containing abrasives as these could scratch or damage the equipment.
- Check regularly to ensure all parts are tight and in working condition. If a part is damaged, do not use until the parts are replaced or repaired.
ASSEMBLY
STEP 1
Lay the first (bottom tier) shelf out for installation, as shown below. Use
fourbolts (#4), four washers (#5), and four nuts (#6) to connect the bottom
shelf
to the left support column (#1) and the right support column (#1)
respectively. Do not tighten it all the way just yet.
STEP 2
Repeat step 1 to install the other two tiers of dumbbell shelves. Use bolts
(#4), washers (#5), and nuts (#6) to separately connect them to the left
support column and the right support column.
Check that the three dumbbell shelves are in place before fully tightening all
the nuts into the bolts. The finished installation should reflect the
illustration on the next page.
PART LIST
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>