WOLFVISION VZ-3neo.UHD Document Camera User Guide
- June 9, 2024
- WOLFVISION
Table of Contents
WOLFVISION VZ-3neo.UHD Document Camera User Guide
VZ-3neo.UHD / VZ-8neo.UHD
Quick Start Guide
First Steps
Before Starting
When using the version with the Swivel feature, mount the Visualizer onto a table top according to the mounting instructions first.
Fold the arm down and remove the cable cover.
Connect the power supply and establish all needed cable connections. Fix all cables by mounting the supplied cable holder (Torx 10). Note thickness of used cables.
Raise the arm up and the Visualizer will start automatically.
Power Key
The Visualizer will be switched on and off by moving the arm up and down.
Additionally, the Visualizer can be switched on and off by pressing the POWER
key on the camera head quickly.
Basic Menu Settings
When the Visualizer is switched on for the first time, basic settings should be performed by accessing the on-screen menu (gear symbol). Use the built-in touch screen to navigate through the menu.
Some of the most important settings are :
Ethernet Settings
Setup the network interface according your infrastructure.
Time Settings
Set time and date.
Manuals, Firmware, Apps, Software, Dimension Drawings,… @ www.wolfvision.com /SUPPORT
Accessories
The Visualizer can be equipped with an infrared remote control, a lightbox, and with dry-erase working surfaces for quick annotations during a presentation.
This Visualizer is not automatically supplied with a remote control. If you wish to use the remote control, please check our homepage, or use the direct link https://bit.ly/3RoAH9I for further details.*
For dry-erase working surfaces, lightboxes, and other accessories, please contact your WolfVision dealer.
* for VZ-8neo.UHD only
Authentication – Password Protection
The built-in touch screen and the web-interface of the Visualizer can be accessed without any credentials.
System relevant topics in the settings of the on-screen menu are password protected.
The default password of the accounts is: “Password” (case sensitive). In case you change this password, we recommend to write them down below:
In case the user-defined administrator password is lost, please contact your WolfVision dealer or WolfVision support.
Manufacturer / Worldwide Distribution
WolfVision GmbH
A-6833 Klaus
AUSTRIA
www.wolfvision.com
E-Mail: [email protected] /
[email protected]
International Distribution Offices
USA
WolfVision Inc.
E-Mail: [email protected] /
[email protected]
Asia
WolfVision Pte Ltd
E-mail:
[email protected]
Middle East
WolfVision Representation Office Middle East
E-Mail:
[email protected]
Germany
WolfVision Germany
E-mail:
[email protected]
Northern Europe
WolfVision Nordic
E-mail:
[email protected]
Japan
WolfVision Co. Ltd.
E-mail:
[email protected]
United Kingdom
WolfVision UK Ltd.
E-Mail: [email protected]
Printed in Austria – August 2021
References
- Presentation, Collaboration & Visualizer Systems - WolfVision GmbH
- Remote Controls: Free-of-charge option - WolfVision GmbH