nvent RAYCHEM SENZ Wi-Fi Digital Timer Thermostat User Guide

: June 5, 2024
: nVent RAYCHEM

Table of Contents

EXAMPLES OF VOICE COMMANDS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RAYCHEM SENZ Wi-Fi Digital Timer Thermostat
User Guide

SETUP AND SYSTEM REQUIREMENTS
Before proceeding, ensure you have the following:

The SENZ WIFI app downloaded and installed on your smartphone (download the SENZ WIFI app from App Store or Google Play)
An account set up in the SENZ WIFI app with your own username and password
At least one linked SENZ WIFI thermostat installed
Confirmed that you can control the SENZ WIFI thermostat(s) via the SENZ WIFI app
Downloaded the Google Home app on your smartphone

Once you have completed the above setup requirements, follow the steps below to enable the Google Assistant setup for the SENZ WIFI thermostat: (NOTE – screenshots of the app may differ depending on the smartphone being used)

HOW TO ENABLE THE GOOGLE ASSISTANT SETUP FOR THE SENZ WI-FI THERMOSTAT

Open the Google Home app on your smartphone
Click the “+” sign to add
Click on ‘Set up device’
Under the ‘Works with Google’ section, click on ‘Have something already set up?’
Scroll/Search for ‘SENZ WIFI Thermostat’ and click on it
Sign in to your id.senzthermostat.nVent.com account using your username and password for the SENZ WIFI app
When you see the permission request to link your Google account with the id.senzthermostat.nVent.com account, click ‘Yes, Allow’
Click ‘Done’ on the top left and close the app page
You should now see the SENZ WIFI thermostat(s) that are available to be linked to Google Home
Select one thermostat (if multiple) and click ‘Next’ on the bottom right
Choose a location/home for that SENZ WIFI thermostat and click ‘Next’ on the bottom right
Choose a room for that SENZ WIFI thermostat and click ‘Next’ on the bottom right
Assign location and rooms for all SENZ WIFI thermostats (if there are multiple) in your account
You can now see your SENZ WIFI thermostats in the Google Home app
Try some voice commands in the table below using the thermostat name that you assigned to the SENZ WIFI or room with your Google Assistant compatible smart speakers

EXAMPLES OF VOICE COMMANDS

Desired Action| What Happens| Can be Applied to| Voice Command| Example Text
---|---|---|---|---
Set a specific temperature| Change the ‘Set to’ to the desired temperature.
Note:
In Weekly Schedule (Program 1,2 or 3) after 2 hours, the Schedule will resume.
In Constant mode this action is permanent.| Individual thermostat or Group| “Hey Google, set [thermostat/group name] to [temperature].”| “Hey Google, set
Bathroom to 22 degrees.”
Put thermostat to constant mode| Puts the thermostat in constant mode.| Individual thermostat or Group| “Hey Google, set [thermostat/group name] to HEAT.”| “Hey Google, set
Kitchen to HEAT.”
Put thermostat to
Weekly Schedule| Puts the thermostat in the last used Weekly
Schedule (aka program mode = Program 1,
Program 2 or Program 3).| Individual thermostat or Group| “Hey Google, set [thermostat/group name] to AUTOMATIC.”| “Hey Google, set Living Room to AUTOMATIC.”
Turn thermostat OFF
(aka Away Mode)| Puts the thermostat to Constant Mode and
changes the ‘Set to’ temperature to 5°C.
This effectively turns your floor heating
system off.| Individual thermostat or
Group| “Hey Google, turn [thermostat/group name] OFF.”| “Hey Google, turn the Bathroom OFF.”
Find out the current
temperature| No changes are made. The current temperature is announced.| Individual thermostat or Group| “Hey Google, what is [thermostat/group name] temperature?”| “Hey Google, what is the Kitchen
temperature?”
Make the temperature slightly warmer| Raise the ‘Set to’ by 1,5°C.
Note: In Weekly Schedule (Program 1,2 or 3) after 2 hours, the Schedule will resume.
In Constant mode this action is permanent.| Individual thermostat or
Group| “Hey Google, increase the temperature of [thermostat/group name].”| “Hey Google, increase
the temperature of the Living Room.”
Make the temperature slightly cooler| Lower the ‘Set to’ by 1,5°C.
Note: In Weekly Schedule (Program 1,2 or 3) after2 hours the Schedule will resume.
In Constant mode this action is permanent.| Individual thermostat or
Group| “Hey Google, decrease the temperature of [thermostat/group name].”| “Hey Google, decrease
the temperature of the Bathroom.”