FISHER & PAYKEL DE8060P2 Front Loader Washing Machine and Dryer User Guide
- June 5, 2024
- Fisher & Paykel
Table of Contents
FISHER & PAYKEL DE8060P2 Front Loader Washing Machine and Dryer User Guide
Installation Instruction
SIDE BY SIDE INSTALL – PAIRING MATRIX
DRYERS | |
---|---|
WASHERS | MODELS |
DH9060P2 | DH9060PG2 |
WH1260F1 | |
WH1160F2 | |
WH1160FG2 | |
WH1060S1 | |
WH1160S1 | |
WH1060SG1 | |
WH1160P3 | |
WH1060P1 | |
WH1260P1 | |
WH7560P2 | • |
WH7560J3 | • |
WH8060J3 | • |
WH8560F1 | • |
WH8060P2 | • |
WH8560P2 | • |
WH9060J3 | • |
WH8560J3 | • |
WH8060P1 | • |
WH9060P3 | |
WH1060P3 | |
WH8560P3 | |
WH8060P3 |
- Matched Pair – designed to complement each other
- Perfect Pair – designed to mirror each other
- Compatible
STACKED INSTALL – PAIRING MATRIX
DRYERS | |
---|---|
WASHERS |
MODELS
| DE8060P2| DE8060P3| DH8060P1| DH8060P3| DH9060P1| DH9060P2| DH9060PG2|
DH9060C1| DH9060FS1| DH9060FSG1
STACKING KIT 428122| STACKING KIT 428159 (WHITE), 99373 (GRAPHITE)
WH1260F1| | | | | •| •| | •| •| •
WH1160F2| | | | | •| •| | •| •| •
WH1160FG2| | | | | •| •| | •| •| •
WH1060S1| | | | | •| •| | •| •| •
WH1160S1| | | | | •| •| | •| •| •
WH1060SG1| | | | | | | •| | |
WH1160P3| | | | | •| •| | •| •| •
WH1060P1| | | | | •| •| | •| •| •
WH1260P1| | | | | •| •| | •| •| •
WH7560P2| •| | •| | X| X| X| X| X|
X
WH7560J3| •| | •| | X| X| X| X| X|
X
WH8060J3| •| | •| | X| X| X| X| X|
X
WH8560F1| •| | •| | | | | | |
WH8060P2| •| | •| | | | | | |
WH8560P2| •| | •| | | | | | |
WH9060J3| •| | •| | | | | | |
WH8560J3| •| | •| | | | | | |
WH8060P1| •| | •| | | | | | |
WH9060P3| | •| | •| | | | | |
WH1060P3| | •| | •| | | | | |
WH8560P3| | •| | •| | | | | |
WH8060P3| | •| | •| | | | | |
-
Matched Pair
-
Perfect Pair
X Not suitable for stacked install – potential safety risk -
Compatible
CLEARANCE & CAVITY DIMENSIONS
- Front panel of the product
CAVITY DIMENSIONS
|
MM
---|---
A Minimum cavity height| 870
B Minimum cavity width| 1260
Minimum cavity depth
- Flush with front panel of the product
- In cupboard
| 655
715
CLEARANCE DIMENSIONS
|
MM
---|---
D Depth of door (widest opening, deepest product)| 450
E Minimum washer door clearance to adjacent wall| 355
F Minimum dryer door clearance to adjacent wall| 335
G Minimum gap clearance to adjacent product or cabinetry2| 20
Applies to sides, top, rear and between products
PLUMBING & ELECTRICIAL
SERVICE DIMENSION
| WASHER| DRYER
---|---|---
MM|
MM
Length of drain hoses| 1600| 1300
Length of power cord| 2000| 1500
C Length of cold water inlet hose 1| 1500| 650
Length of hot water inlet hose| 1500| n/a
- Dryer cold water inlet hose is only present on DH9060FS model dryers
- Cold water inlet hoses can be interchanged between washer and dryer.
SPECIFICATIONS
ELECTRICAL|
---|---
Supply| 220 – 240 V, 50 Hz
Service| 10 amp circuit
PLUMBING|
Pressure| max 1 MPa (150psi)
min 30 kPa (4.5psi)
min 50 kPa (7.3psi)1
Flow rate at tap| min. 6 litres/minute
Cold water temp| max 35°C
Hot water temp| max 65°C
Hot water inlet may not be an option for your washer model, refer to your
washer installation guide.
WH1260F, WH1160F, WH1160S, WH1060S
WASHER DRAINAGE HEIGHTS
- Recommended standpipe height is 800mm.
© Fisher & Paykel Appliances 2021. All rights reserved.
The models shown in this guide may not be available in all markets and are subject to change at any time.
The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
For current details about model and specification availability in your country, please go to our website or contact your local Fisher & Paykel dealer.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>