GLEAM Microphone Stand – Tripod Boom Mic Stand with Carrying Bag Microphones-Complete Features/Instruction Guide

GLEAM Microphone Stand – Tripod Boom Mic Stand with Carrying Bag

Microphones

Specifications

• Weight
  3.3 pounds

• Dimensions
  11.81 x 11.81 xa57.09 inches

• Size
  Tripod

Gleam Microphone Stand is a very useful stand. Its have many functions that you need adjustments at different positions to speech or talk and singing. It is a very useful thing that you can carry in a bag anywhere where you can easily go and attend the function. And accessories include is microphone clip and three ferrules. It can hold a microphone very securely. And the main feature is that it can hold any Universal Compatibility wide range of microphones. With organized clips. You can also adjust the height of the microphone according to you. And the maximum height is 23 inches and the minimum is 23 inches. And the Boom length also adjusts maximum extension is 30 inches and the minimum extension is 4 inches.

What’s in the box?

• Tripod Microphone stand x 1
• Carrying bag x 1
• Microphone clip x 1
• Wire hoop x 3

Features

• Solid and durable
• 2 point boom adjustment
• Ergonomic handling

Frequently Asked Questions

• Q : Can an iPad holder be fitted to main portion?
  A: You can. That is how I use mine.

• Q: What are the dimensions for the included carrying bag ; both inner and outer dimensions ?
  A: A very soft cloth bag that measures 24” by 3” (round) and flattens when empty.

• Q: Can you use this stand with a vintage mic?
  A: I am not certain what vintage mic you speaking about, the big rectangular block type from the 30s-50s Era or the simple ball-end ones from the 60s, but depending on the kind of end clip you have, it should hold it!

• Q: Can this hold a karaoke microphones
  A: Yes, it is fine for karaoke mics. You may have to change the mic clip, however. That depends on the size of your mic. It needs to have a snug fit so it doesn’t slip out, but is still easily removed.

• Q: what is the thread size of the ld micset 1 stand ?
  A: Threads of mic stands usually come in a small size or a wider size. This one is the smaller size. (I don’t have a way of measuring it.)

• Q: Is the pole removable to be used as a boom pole on a film set?
  A: You could probably remove it, (the vertical), but I couldn’t remove mine, without possibly damaging it. Doubtful.

• Q: What are the dimensions when fully compact?
  A: Approximately 28 to 30 inches long and approx. 3.5 inches in diameter. Hope this helps.

• Q: Will this work with a zoom h4n pro 4-track portable recorder?
  A: I it has a female threaded end similar to a mic holder, then yes. If not, I’m sure there is a holder that you can but to set the recorder in.

• Q: What is the total height? Is this a 5 ft mic stand, 6 ft mic stand, etc?
  A: It is only about 4 feet tall. It is an articulated stand that seems to be for sitting and playing. I like it because I just play at home to entertain myself. Also the 3 legs are kinda long and can get in the way at times.

• Q: Can the stand be used without the boom? Just a straight stand?
  A: Yes it can be set up vertically. The boom will still be used for that. It will pivot to point straight up. I just pulled mine out of it’s bag and set it up that way.

• Q: What is the thread size?
  A: If I understand the question correctly, it is a pretty heavy thread about 3/16 to 1/4 inch. Hope this helps is is what you are asking for. These only screws together in approx. 3 spots and they appear to be the same size throughout.

• Q: I am still confused about the maximum height is it 43” or 57” , want to know if it’s high enough for standing adult?
  A: Yea it can be used by an adult standing. The main body is 43” but the boom can extend an additional 30”.

• Q: Can the microphone holder be removed to screw on a cold shoe?
  A: To do that I believe (but am not 100% confident) that you would need an adapter to get down to the diameter needed for the cold shoe.

• Q: Can I use it with MXL 990?
  A: Yes. Your MXL 990 Should have come with a mic clip. You can screw that onto the mic stand or you could get a shouck mount that is suzed for you microphone and screw that onto the mic stand to help isolate the mic from vibrations transmitted through the stand.

• Q: Does the main neck of the stand expand at all?
  A: Yes it does extend out all the way

• Q: Does it work with the rode ntk microphone ?
  A: No..unless you buy top piece to hold it.Stand is great but I wouldn’t recommend it for that mic.

• Q: Would this be good for my cad gxl 2200?
  A: Yes, be sure to buying a spider

• Q: Has anyone used this to connect to a rode podmic?
  A: It’s a mic stand. I use them for cordless mics which are heavier than most , so should be good for any type of mic.

• Q: Will 3/16 or 5/16 thread work?
  A: Yes

• Q: What size is it fully collapsed?
  A: Pretty much the length of the bottom pole… It’s shorter than most.

• Q: Does it work with the Audio technica AT2020?
  A: Yes, so long as you have the somewhat unusual mic clip that comes with the AT2020. The clip has standard threads. i have 2 AT2020s.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>