atomi 702403 WiFi Range Extender User Manual
- June 5, 2024
- atomi
Table of Contents
702403 WiFi Range Extender
User Manual
Thank you for purchasing the atomi WiFi Range Extender
Say goodbye to dead zones and say hello to better internet with the atomi WiFi
Range Extender. It increases your router’s range and strengthens your WiFi
connection.
Now you’ll be able to stream movies in the backyard, and pick up a strong
signal from anywhere in the house!
What’s Inside
Wifi Range Extender
Specifications
Wireless Speed: Up to 750Mbps
Frequency Range: 2.4G & 5.8G
Support Operating System: Windows XPNista/Win 7/Win 8 /Win8.1 /Win10 /Linux
/Mac OS
Smartphone Setup
Plug your WiFi Extender into any outlet
NOTE: If the two lights don’t turn on. press the reset button on the bottom
for 8 seconds using a paper clip
Connect your extender SSID
Both 2.4G and 5G are available. Choose 5G to set up
NOTE: You cannot surf the Internet until you finish all the setting steps
Sign in to the management page
Use the browser to open the management page. It is recommended that you use
Google Chrome or Mozilla Firefox.
Please type the address 192168188.1 on the URL bar.
NOTE: Make sure you are connected to the SSID (with-5G-XXXXXX) of the
WiFi Extender successfully
Scan and select your SSID host router
Enter the password for your host router and press Next Set your Extender SSID and password, and press Next
Check the details and make a note of the Wireless info. then press Start Connect and wait 30-60 seconds
When you finish setting up. please wait 30-40 seconds until the extender light turns on
Connect to your WiFi Extender
Computer Setup
Plug your WiFi Extender into any outlet
NOTE: If the two lights don’t turn on. press the reset button on the
bottom for 8 seconds using a paper clip
Connect your extender SSID
Both 2.4G and 5G are available. Choose 5G to set up
NOTE: You cannot surf the Internet until you finish all the setting steps
Sign in to the management page
Use the browser to open the management page. It is recommended that you use
Google Chrome or Mozilla Firefox.
Please type the address 192.168.188.1 on the URL bar.
NOTE: Make sure you are connected to the SSID (with-5G-XXXXXX) of the
WiFi Extender successfully
Scan and select your SSID host router
Nate: Both 2.4G and 5G wireless con beet: tended. Please. extend one at the
time
Different channels %Nuking together may interfere with the signal orb the
netvaantspeedwIl get slam Please. change the main rcuterchannel in time
Enter the password for your host router and press Next Set your Extender
SSID and password, and press Next Check the details and make a note of the
Wireless info, then press Start Connect and wait 30-60 seconds
Once you’ve finished setting up, please wait 30-40 seconds until the extender light turns on
When the third light comes on. the Extender setup was successfully done
Connect to your Extender
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Safety Information
- Read these instructions carefully for best use.
- DO NOT use the WIFI Range Extender near water or expose it to rain or moisture.
- DO NOT use the WIFI Range Extender near open flames, such as candles, heat sources, radiators, and stoves.
- Only clean the WIFI Range Extender with a dry cloth.
- Caution: Risk of electric shock. Grounding continuity must be maintained.
- For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet. If needed.
- Please check prior use, if the output voltage and current of the power supply Is suitable for the product.
- Children should be supervised to ensure that they do not play with the appliance.
FCC Cautions
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
For questions or concerns, email us at
info@atomiusa.com
Manufactured and marketed bottom Inc.
10 West 33rd St New York. NY10001 atornl trademark of Antonino,
Designed try atomi in New York.
Made in China
Two-year limited warranty from the date of purchase against defeats
In material arc workmanship.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>