Power Beauty KBSL05001 Frio Speaker Cooler Instruction Manual
- June 5, 2024
- Power Beauty
Table of Contents
- Technical Specification
- Contents
- Battery Charging
- Bluetooth Function
- PAIRING Max. 2pcs:
- TROUBLESHOOTING
- SETTING TIMER
- Remote control
- REPLACING REMOTE CONTROL BATTERIES
- Warnings and Cautions
- General Care:
- Care for the environment
- Warranty Information
- After Sales Support / Product Returns
- FCC Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Frio Speaker Cooler Please read these instructions carefully before using
them and keep them for future reference.
Imported By: Forward Industries, 33401. U.S.A
Technical Specification
Ambient temperature for operation: | -14˚ C to 35˚C |
---|---|
LEDs: | 12pcs RGB+9pcs White, 7 Colours |
LEDs Rated Watt: | 0.2W max per piece |
Battery: | 7.4V Lithium 2000mAh |
Remote control battery: | CR2025 (3V) |
Remote control effective distance: | 3.15~3.94 inches |
Charging time: | around 4 hours |
Operation time: | Light only up to 10hrs, |
60% volume + Light around 5.5hrs
Charger – USB Cable| Input: 5V
Speakers:| 2x12W base + 2x6W tweeters
IP protection:| Speaker: IP44
USB cable: IP20
Classification of radiation:| EN 55032, EN55035,
EN61000-3-2, EN61000-3-3
Contents
- Speaker Cooler x1
- USB cable charging cable x1
- Remote control x1
- User manual x1
Battery Charging
- Please charge the battery fully before first use.
- Connect your USB adapter (Use Output 5V ONLY!) to the speaker using the charge port on the underside of the light. During battery charging the indicator will be red.
- Charge the speaker until the indicator light is off. Cover the charge port after it is fully charged.
- After the battery has been charged, turn on the speaker using the ON/OFF button on the underside. The indicator should be blue. Then follow the Bluetooth function
instructions.
NOTE:
- The built-in battery is not replaceable. Please do not remove or replace it in the trash. If you must dispose of this speaker, bring it to your local recycling center.
- Disconnect the external adapter from the charge port when not in use or when the speaker is fully charged.
Bluetooth Function
- Make sure the battery is fully charged before attempting to connect the first time.
- For stereo sound, it is possible to connect and pair up to 2 speakers to your device at the same time.
- To connect the 1st speaker, press the ON/OFF button on the bottom of the speaker. There will be an audible activation beep and the blue indicator light will flash.
- On your phone/smart device, turn Bluetooth to ON and select “KBPB Speaker Cooler” from the device list. Once your device is connected, you will hear a second audible beep from the speaker and the indicator light will be blue.
PAIRING Max. 2pcs:
- To connect with the 2nd speaker, press and hold the ON/OFF button on both speakers. You will hear a beep sound from the speakers. The one on which the Bluetooth indicator light flashes rapidly will be the main unit. The other one will flash slowly, to become the secondary unit.
- Now repeat Point 4 above to connect the Bluetooth on your phone. Once connected, the Bluetooth indicator light of the main speaker will stay blue. Both indicator lights will turn off automatically when music is playing.
- To cancel the pairing, press and hold the ON/OFF button until a beep is heard.
- To turn off the Bluetooth function, press the ON/OFF button
TROUBLESHOOTING
- Under Pairing mode, short press the ON/OFF button on the main unit. The secondary unit’s music will be off but the light is on; Turn off the secondary unit, the main unit’s music and light will keep working individually and out of the pairing mode in 10 seconds.
- To switch the Main unit setting, disconnect the Bluetooth in your device list first and then long-press the ON/OFF on the new unit that you want to be the main unit.
- If your Bluetooth device is more than 30ft away from the main speaker, it will disconnect. If you move the main speaker within 30ft, then they can be paired automatically and resume playing music. If you move the secondary speaker more than 30ft(10 m) away from the Bluetooth device and within 19ft of the main speaker, the secondary can still play music. If you move the secondary more than 19ft away from the main unit, it can not play music. They can pair automatically and play music again when you move it back within 19ft.
- This LED BT Speaker Light has a memory storage function (if the batteries are not fully exhausted), when you turn on the speaker, the light and speaker will maintain the same settings and pairing as the last time used. If the battery is exhausted there will be no memory storage function and you will need to pair the speakers.
SETTING TIMER
The Timer function allows the product to automatically turn off after a set
amount of time. In order to set the timer, press the TIME Button (located on
the Remote Control)
once to change color, each color indicates a different Timer Duration. The
Speaker will stay lit by the LED Color that is chosen for the entire Timer
Duration. Follow the Guide
Below:
LED Color | Timer Duration |
---|---|
Red | 30 min. |
Green | 60 min |
Blue | 90 min |
Yellow | 120 min. |
Light Blue | 150 min. |
Pink | 180 min. |
Note: To deactivate the Timer, press the ON/OFF Button
Remote control
Before using the remote control remove the small plastic sheet from the battery cover.
- Brightness Up
- Brightness Down
- LED ON/OFF
- Bluetooth-See CONNECTING VIA BLUETOOTH
- Red LED
- Green LED
- Blue LED
- Manually Switch LED Color
- Yellow LED
- Light Blue LED
- Pink LED
- Warm White LED
- Warm LED-Increase White
- Previous Track
- Warm LED-Decrease White
- Flash-Dancing LED Colors along with Music
- Volume Down
- Play/Pause
- Volume Up
- Time-See SETTING TIMER
- Next Track
- Smooth-Automatic Smooth Transition of LED Colors
- Remote control effective distance: 8-10 meters
REPLACING REMOTE CONTROL BATTERIES
- Removing the old battery by pressing the tab on the side of the battery cover and then sliding off the cover from the remote control.
- Take notice of the positive (+) and negative(–) directions of the battery. Make sure that the new battery (CR2025) is inserted the right way.
- Dispose of the old battery responsibly.
Warnings and Cautions
These products and their packaging are not toys; please keep them out of reach of children.
- The remote control and USB Cable/charger are not waterproof and must be kept in a dry location at all times.
- Never charge the product in a pool, water, or rain; charge in a dry, indoor location.
- Disconnect the power adapter from the main power outlet when not in use.
- Do not stand or jump on this product.
- Do not sit on this product if it is cracked or damaged.
- Keep the product away from chemicals and heat.
- Do not attempt to disassemble the product.
Outdoor Use:
- The external adapter should not be used outdoor, not exposed to rain, humidity, any liquid, or heat.
- The remote control should not be exposed to rain, humidity, any liquid, or heat.
- Do not use these products outdoors if they are cracked or damaged;
- Never charge this product outdoor.
- The floating Pool speaker has a waterproof level of protection, but should NOT be fully submerged as it may damage the speaker/light.
General Care:
It is recommended that after using the products are turned off, rinsed using
clean water, and dried using a soft cloth. Store these products out of reach
of children and direct
sunlight when not in use.
Care for the environment
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Warranty Information
- 1 year for the electronic part
- 2 years for housing
After Sales Support / Product Returns
If you have questions regarding the operation of your purchase, or in the
unlikely event you need to return the unit because it is faulty or is no
longer wanted, please contact our product returns department at
customerservice@forwardindustries.com,
or 561-465-0030, Option 0.
Address: Forward Industries, 105 South Narcissus Avenue Suite 412, West Palm
Beach, FL 33401
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules, the operation is subject
to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that
may cause undesired operation.
-
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment. -
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.